Re: [PATCH v6 0/6] can: mcp251xfd: add gpio functionality

[Marc Kleine-Budde]

On 01.10.2025 14:40:00, Viken Dadhaniya wrote:
> Hi all,
>
> The mcp251xfd allows two pins to be configured as GPIOs. This series
> adds support for this feature.
>
> The GPIO functionality is controlled with the IOCON register which has
> an erratum.
>
> Patch 1 from https://lore.kernel.org/linux-can/20240429-mcp251xfd-runtime_pm-v1-3-c26a93a66544@xxxxxxxxxxxxxx/
> Patch 2 refactor of no-crc functions to prepare workaround for non-crc writes
> Patch 3 is the fix/workaround for the aforementioned erratum
> Patch 4 only configure pin1 for rx-int
> Patch 5 adds the gpio support
> Patch 6 updates dt-binding
>
> As per Marc's comment on below patch, we aim to get this series into
> linux-next since the functionality is essential for CAN on the RB3 Gen2
> board. As progress has stalled, Take this series forward with minor code
> adjustments. Include a Tested-by tag to reflect validation performed on the
> target hardware.
>
> https://lore.kernel.org/all/20240806-industrious-augmented-crane-44239a-mkl@xxxxxxxxxxxxxx/

Applied to linux-can-next.

Thanks,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |

Attachment: signature.asc
Description: PGP signature