Re: [PATCH v4 3/5] memory: tegra186-emc: Support non-bpmp icc scaling

[Jon Hunter]

On 11/11/2025 17:04, Aaron Kling wrote:

...

> My setup uses the boot stack from L4T r32.7.6, though cboot is source
> built and has had changes over time to support newer Android versions.
> There shouldn't be anything there that would affect emc clock, though.
>
> I'm seeing the emc clock stay at the boot value, namely 1600MHz. Per
> both debugfs clk/emc/clk_rate and bpmp/debug/clk/emc/rate. I don't
> even see 250MHz as an option. Debugfs emc/available_rates lists 204MHz
> as the closest entry.
>
> I'm trying to think what could cause a drop in the selected clock
> rate. This patch should only dynamically change the rate if the opp
> tables exist, enabling the cpufreq based scaling via icc. But those
> tables don't exist on linux-next right now. My test ramdisk does
> nothing except set up sysfs/procfs/etc just enough to run a busybox
> shell for debugging. Do the Nvidia regression testing boot scripts do
> anything to sysfs or debugfs that would affect emc?

So this is definitely coming from ICC. On boot I see a request for
250MHz coming from the PCIe driver ...

[   13.861227] tegra186_emc_icc_set_bw-356: rate 250000000
[   13.861350] CPU: 1 UID: 0 PID: 68 Comm: kworker/u32:1 Not tainted 6.18.0-rc4-next-20251110-00001-gfc12493c80fb-dirty #9 PREEMPT
[   13.861362] Hardware name: NVIDIA Jetson AGX Xavier Developer Kit (DT)
[   13.861370] Workqueue: events_unbound deferred_probe_work_func
[   13.861388] Call trace:
[   13.861393]  show_stack+0x18/0x24 (C)
[   13.861407]  dump_stack_lvl+0x74/0x8c
[   13.861419]  dump_stack+0x18/0x24
[   13.861426]  tegra186_emc_icc_set_bw+0xc8/0x14c
[   13.861438]  apply_constraints+0x70/0xb0
[   13.861451]  icc_set_bw+0x88/0x128
[   13.861461]  tegra_pcie_icc_set+0x7c/0x10c [pcie_tegra194]
[   13.861499]  tegra_pcie_dw_start_link+0x178/0x2b0 [pcie_tegra194]
[   13.861510]  dw_pcie_host_init+0x664/0x6e0
[   13.861523]  tegra_pcie_dw_probe+0x6d4/0xbfc [pcie_tegra194]
[   13.861534]  platform_probe+0x5c/0x98
[   13.861547]  really_probe+0xbc/0x2a8
[   13.861555]  __driver_probe_device+0x78/0x12c
[   13.861563]  driver_probe_device+0x3c/0x15c
[   13.861572]  __device_attach_driver+0xb8/0x134
[   13.861580]  bus_for_each_drv+0x84/0xe0
[   13.861588]  __device_attach+0x9c/0x188
[   13.861596]  device_initial_probe+0x14/0x20
[   13.861610]  bus_probe_device+0xac/0xb0
[   13.861619]  deferred_probe_work_func+0x88/0xc0
[   13.861627]  process_one_work+0x148/0x28c
[   13.861640]  worker_thread+0x2d0/0x3d8
[   13.861648]  kthread+0x128/0x200
[   13.861659]  ret_from_fork+0x10/0x20

The actual rate that is set is 408MHz if I read the rate after
it is set ...

[   13.912099] tegra186_emc_icc_set_bw-362: rate 408000000

This is a simple boot test and so nothing we are doing via
debugfs/sysfs to influence this.

Jon

--
nvpublic