Re: [PATCH v12 3/6] i2c: tegra: Update Tegra256 timing parameters
From: Jon Hunter
Date: Mon Nov 17 2025 - 05:00:42 EST
On 15/11/2025 04:26, Akhil R wrote:
Update the timing parameters of Tegra256 so that the signals are complaint
with the I2C specification for SCL low time.
Signed-off-by: Akhil R <akhilrajeev@xxxxxxxxxx>
---
drivers/i2c/busses/i2c-tegra.c | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index c0382c9a0430..8a696c88882e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -1677,14 +1677,13 @@ static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
.setup_hold_time_hs_mode = 0x090909,
.has_interface_timing_reg = true,
};
-
Please don't remove this new line. Otherwise ...
static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
.has_continue_xfer_support = true,
.has_per_pkt_xfer_complete_irq = true,
.clk_divisor_hs_mode = 7,
.clk_divisor_std_mode = 0x7a,
.clk_divisor_fast_mode = 0x40,
- .clk_divisor_fast_plus_mode = 0x19,
+ .clk_divisor_fast_plus_mode = 0x14,
.has_config_load_reg = true,
.has_multi_master_mode = true,
.has_slcg_override_reg = true,
@@ -1695,14 +1694,13 @@ static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
.has_apb_dma = false,
.tlow_std_mode = 0x8,
.thigh_std_mode = 0x7,
- .tlow_fast_mode = 0x3,
- .thigh_fast_mode = 0x3,
- .tlow_fastplus_mode = 0x3,
- .thigh_fastplus_mode = 0x3,
+ .tlow_fast_mode = 0x4,
+ .thigh_fast_mode = 0x2,
+ .tlow_fastplus_mode = 0x4,
+ .thigh_fastplus_mode = 0x4,
.setup_hold_time_std_mode = 0x08080808,
- .setup_hold_time_fast_mode = 0x02020202,
- .setup_hold_time_fastplus_mode = 0x02020202,
- .setup_hold_time_hs_mode = 0x090909,
+ .setup_hold_time_fast_mode = 0x04010101,
+ .setup_hold_time_fastplus_mode = 0x04020202,
.has_interface_timing_reg = true,
};
Reviewed-by: Jon Hunter <jonathanh@xxxxxxxxxx>
Jon
--
nvpublic