[PATCH v4 0/2] iio: amplifiers: add support for ADL8113 Low Noise Amplifier

[Antoniu Miclaus]

This patch series adds support for the Analog Devices ADL8113, a 10MHz to 12GHz
Low Noise Amplifier with integrated bypass switches.

The ADL8113 provides four operation modes controlled by two GPIO pins:
- Internal Amplifier (14dB gain)
- Internal Bypass (0dB gain)
- External Bypass A (0dB gain) - Signal routes from RFIN to OUT_A and from IN_A to RFOUT
- External Bypass B (0dB gain) - Signal routes from RFIN to OUT_B and from IN_B to RFOUT

Antoniu Miclaus (2):
  dt-bindings: iio: amplifiers: add adl8113
  iio: amplifiers: adl8113: add driver support

 .../bindings/iio/amplifiers/adi,adl8113.yaml  |  93 ++++++
 drivers/iio/amplifiers/Kconfig                |  12 +
 drivers/iio/amplifiers/Makefile               |   1 +
 drivers/iio/amplifiers/adl8113.c              | 277 ++++++++++++++++++
 4 files changed, 383 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,adl8113.yaml
 create mode 100644 drivers/iio/amplifiers/adl8113.c

-- 
2.43.0