Re: [PATCH 3/5] PCI: dwc: Remove MSI/MSIX capability if iMSI-RX is used as MSI controller

[Manivannan Sadhasivam]

+ Folks who were part of the previous discussions on this topic.

On Sun, Nov 09, 2025 at 10:59:42PM -0800, Qiang Yu wrote:
> Some platforms may not support ITS (Interrupt Translation Service) and
> MBI (Message Based Interrupt), or there are not enough available empty SPI
> lines for MBI, in which case the msi-map and msi-parent property will not
> be provided in device tree node. For those cases, the DWC PCIe driver
> defaults to using the iMSI-RX module as MSI controller. However, due to
> DWC IP design, iMSI-RX cannot generate MSI interrupts for Root Ports even
> when MSI is properly configured and supported as iMSI-RX will only monitor
> and intercept incoming MSI TLPs from PCIe link, but the memory write
> generated by Root Port are internal system bus transactions instead of
> PCIe TLPs, so they are ignored.
> 
> This leads to interrupts such as PME, AER from the Root Port not received
> on the host and the users have to resort to workarounds such as passing
> "pcie_pme=nomsi" cmdline parameter.
> 
> To ensure reliable interrupt handling, remove MSI and MSI-X capabilities
> from Root Ports when using iMSI-RX as MSI controller, which is indicated
> by has_msi_ctrl == true. This forces a fallback to INTx interrupts,
> eliminating the need for manual kernel command line workarounds.
> 
> With this behavior:
> - Platforms with ITS/MBI support use ITS/MBI MSI for interrupts from all
>   components.
> - Platforms without ITS/MBI support fall back to INTx for Root Ports and
>   use iMSI-RX for other PCI devices.
> 
> Signed-off-by: Qiang Yu <qiang.yu@xxxxxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/dwc/pcie-designware-host.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 20c9333bcb1c4812e2fd96047a49944574df1e6f..3724aa7f9b356bfba33a6515e2c62a3170aef1e9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -1083,6 +1083,16 @@ int dw_pcie_setup_rc(struct dw_pcie_rp *pp)
>  
>  	dw_pcie_dbi_ro_wr_dis(pci);
>  
> +	/*
> +	 * If iMSI-RX module is used as the MSI controller, remove MSI and
> +	 * MSI-X capabilities from PCIe Root Ports to ensure fallback to INTx
> +	 * interrupt handling.
> +	 */
> +	if (pp->has_msi_ctrl) {
> +		dw_pcie_remove_capability(pci, PCI_CAP_ID_MSI);
> +		dw_pcie_remove_capability(pci, PCI_CAP_ID_MSIX);
> +	}
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(dw_pcie_setup_rc);
> 
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்