Re: [PATCH v3 2/2] leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM

[Bjorn Andersson]

On Wed, Nov 19, 2025 at 02:06:43PM +0800, Fenglin Wu via B4 Relay wrote:
> From: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
> 
> The PWM signal from the LPG channel can be routed to PMIC GPIOs with
> proper GPIO configuration, and it is not necessary to enable the
> TRILED channel in that case. This also applies to the LPG channels
> that mapped to TRILED channels. Additionally, enabling the TRILED
> channel unnecessarily would cause a voltage increase in its power
> supply. Hence remove it.
> 

Reviewed-by: Bjorn Andersson <andersson@xxxxxxxxxx>

> Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
> Signed-off-by: Fenglin Wu <fenglin.wu@xxxxxxxxxxxxxxxx>
> ---
>  drivers/leds/rgb/leds-qcom-lpg.c | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
> index 4f2a178e3d265a2cc88e651d3e2ca6ae3dfac2e2..e197f548cddb03d079c54c4a0f402402c5d047e2 100644
> --- a/drivers/leds/rgb/leds-qcom-lpg.c
> +++ b/drivers/leds/rgb/leds-qcom-lpg.c
> @@ -2,7 +2,7 @@
>  /*
>   * Copyright (c) 2017-2022 Linaro Ltd
>   * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
> - * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>   */
>  #include <linux/bits.h>
>  #include <linux/bitfield.h>
> @@ -1247,8 +1247,6 @@ static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
>  
>  	lpg_apply(chan);
>  
> -	triled_set(lpg, chan->triled_mask, chan->enabled ? chan->triled_mask : 0);
> -
>  out_unlock:
>  	mutex_unlock(&lpg->lock);
>  
> 
> -- 
> 2.34.1
> 
>