[PATCH] ARM: dts: lan966x: Fix the access to the PHYs for pcb8290

[Horatiu Vultur]

The problem is that the MDIO controller can't detect any of the PHYs.
The reason is that the lan966x is not pulling high the GPIO 53 that is
connected to the PHYs reset GPIO. Without doing this the PHYs are kept
in reset. The mdio controller framework has the possiblity to control a
GPIO to release the reset of the PHYs. So take advantage of this and set
line to be high before accessing the PHYs.

Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
 arch/arm/boot/dts/microchip/lan966x-pcb8290.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
index 3b7577e48b467..50bd29572f3ed 100644
--- a/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
+++ b/arch/arm/boot/dts/microchip/lan966x-pcb8290.dts
@@ -54,6 +54,7 @@ udc_pins: ucd-pins {
 &mdio0 {
 	pinctrl-0 = <&miim_a_pins>;
 	pinctrl-names = "default";
+	reset-gpios = <&gpio 53 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	ext_phy0: ethernet-phy@7 {
-- 
2.34.1