RE: [PATCH v9 0/6] initial usbdrd phy support for Exynosautov920 soc

From: Pritam Manohar Sutar

Date: Wed Nov 19 2025 - 05:42:23 EST

Hi,

Gentle reminder.

> -----Original Message-----
> From: Pritam Manohar Sutar <pritam.sutar@xxxxxxxxxxx>
> Sent: 24 October 2025 04:09 PM
> To: 'vkoul@xxxxxxxxxx' <vkoul@xxxxxxxxxx>; 'kishon@xxxxxxxxxx'
> <kishon@xxxxxxxxxx>; 'robh@xxxxxxxxxx' <robh@xxxxxxxxxx>;
> 'krzk+dt@xxxxxxxxxx' <krzk+dt@xxxxxxxxxx>; 'conor+dt@xxxxxxxxxx'
> <conor+dt@xxxxxxxxxx>; 'alim.akhtar@xxxxxxxxxxx'
> <alim.akhtar@xxxxxxxxxxx>; 'andre.draszik@xxxxxxxxxx'
> <andre.draszik@xxxxxxxxxx>; 'peter.griffin@xxxxxxxxxx'
> <peter.griffin@xxxxxxxxxx>; 'kauschluss@xxxxxxxxxxx' <kauschluss@xxxxxxxxxxx>;
> 'johan@xxxxxxxxxx' <johan@xxxxxxxxxx>; 'ivo.ivanov.ivanov1@xxxxxxxxx'
> <ivo.ivanov.ivanov1@xxxxxxxxx>; 'm.szyprowski@xxxxxxxxxxx'
> <m.szyprowski@xxxxxxxxxxx>; 's.nawrocki@xxxxxxxxxxx'
> <s.nawrocki@xxxxxxxxxxx>
> Cc: 'linux-phy@xxxxxxxxxxxxxxxxxxx' <linux-phy@xxxxxxxxxxxxxxxxxxx>;
> 'devicetree@xxxxxxxxxxxxxxx' <devicetree@xxxxxxxxxxxxxxx>; 'linux-
> kernel@xxxxxxxxxxxxxxx' <linux-kernel@xxxxxxxxxxxxxxx>; 'linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx' <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; 'linux-
> samsung-soc@xxxxxxxxxxxxxxx' <linux-samsung-soc@xxxxxxxxxxxxxxx>;
> 'rosa.pila@xxxxxxxxxxx' <rosa.pila@xxxxxxxxxxx>;
> 'dev.tailor@xxxxxxxxxxx' <dev.tailor@xxxxxxxxxxx>;
> 'faraz.ata@xxxxxxxxxxx' <faraz.ata@xxxxxxxxxxx>;
> 'muhammed.ali@xxxxxxxxxxx' <muhammed.ali@xxxxxxxxxxx>;
> 'selvarasu.g@xxxxxxxxxxx' <selvarasu.g@xxxxxxxxxxx>
> Subject: RE: [PATCH v9 0/6] initial usbdrd phy support for Exynosautov920 soc
>
> Hi Vinod,
>
> Gentle reminder. Can you please take this to your tree and let me know if any
> comments?
>
> > -----Original Message-----
> > From: Pritam Manohar Sutar <pritam.sutar@xxxxxxxxxxx>
> > Sent: 10 October 2025 12:39 PM
> > To: vkoul@xxxxxxxxxx; kishon@xxxxxxxxxx; robh@xxxxxxxxxx;
> > krzk+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; alim.akhtar@xxxxxxxxxxx;
> > andre.draszik@xxxxxxxxxx; peter.griffin@xxxxxxxxxx;
> > kauschluss@xxxxxxxxxxx; johan@xxxxxxxxxx;
> > ivo.ivanov.ivanov1@xxxxxxxxx; m.szyprowski@xxxxxxxxxxx;
> > s.nawrocki@xxxxxxxxxxx; pritam.sutar@xxxxxxxxxxx
> > Cc: linux-phy@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> > linux-samsung- soc@xxxxxxxxxxxxxxx; rosa.pila@xxxxxxxxxxx;
> > dev.tailor@xxxxxxxxxxx; faraz.ata@xxxxxxxxxxx;
> > muhammed.ali@xxxxxxxxxxx; selvarasu.g@xxxxxxxxxxx
> > Subject: [PATCH v9 0/6] initial usbdrd phy support for Exynosautov920
> > soc
> >
> > This SoC has a single USB 3.1 DRD combo phy and three USB2.0 only DRD
> > phy controllers as mentined below
> >
> > * Combo phy supports USB3.1 SSP+(10Gbps) protocol and is backwards
> > compatible to the USB3.0 SS(5Gbps). 'Add-on USB2.0' phy is added
> > to support USB2.0 HS(480Mbps), FS(12Mbps) and LS(1.5Mbps) data rates.
> > These two phys are combined to form a combo phy as mentioned below.
> >
> >
> > USB30DRD_0 port
> >
> > +------------------------------------------------------------+
> > | |
> > | (combo) USB phy controller |
> > | +----------------------------------------------+ |
> > | | USB HSPHY | |
> > | | (samsung,exynosautov920-usbdrd-combo-hsphy) | |
> > | +----------------------------------------------+ |
> > | |
> > | +--------------------------------------------------+ |
> > | | USB SSPHY | |
> > | | (samsung,exynosautov920-usb31drd-combo-ssphy) | |
> > | +--------------------------------------------------+- |
> > | |
> > +------------------------------------------------------------+
> > | |
> > | USBDRD30 Link |
> > | Controller |
> > +------------------------------------------------------------+
> >
> > * USB2.0 phy supports only UTMI+ interface. USB2.0DRD phy
> > is very similar to the existing Exynos850 support in this driver.
> >
> > USB20DRD_0/1/2 ports
> >
> > +---------------------------------------------------+
> > | |
> > | USB PHY controller |
> > | +-----------------------------------------+ |
> > | | USB HSPHY | |
> > | | (samsung,exynosautov920-usbdrd-phy) | |
> > | +-----------------------------------------+ |
> > | |
> > +---------------------------------------------------+
> > | |
> > | USBDRD20_* Link |
> > | Controller |
> > | |
> > +---------------------------------------------------+
> >
> > The "USB20 phy output isolation" is shared across the USB20 phys.
> > We have to bypass isolation when any one of the USBs is configured and
> > enable it when all are turned off. The "USB31 phy isolation"
> > is seperate for USB31 phy.
> >
> > This patchset only supports device mode and same is verified with as
> > NCM device
> >
> > changelog
> > ----------
> > Changes in v9:
> > - added RB tags those were given in v7 [1] and v8.
> > - updated commit message in patch no.1 by adding supplies'
> > names those are taken from phy User Manual [2]
> > link for v8:
> > https://lore.kernel.org/linux-phy/20250903073827.3015662-1-
> > pritam.sutar@xxxxxxxxxxx/
> > [1]: https://lore.kernel.org/linux-phy/20250824-mustang-of-glorious-
> > sufficiency-b55bf4@kuoka/
> > [2]: https://lore.kernel.org/linux-phy/02ef5180-ad56-45f0-a56f-
> > 87f442bf6793@xxxxxxxxxx/
> >
> > Changes in v8:
> > - modified supplies' names in schema and driver.
> > - Since supplies' names are changed, modified patch no 5. to
> > fix warnings in dtbs_check dt_binding_check.
> > - updated commit message for patch no. 1, 3 and 5 to describe
> > hardware details.
> > link for v7:
> > https://lore.kernel.org/linux-phy/20250822093845.1179395-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Changes in v7:
> > - added fixes for driver build warnings
> > link for v6:
> > https://lore.kernel.org/linux-phy/20250821073703.2498302-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Changes in v6:
> > - added else part for new supplies in schemas those are only
> > supported for exynosautov920.
> > - addressed comments for driver given in v5.
> > link for v5:
> > https://lore.kernel.org/linux-phy/20250805115216.3798121-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Changes in v5:
> >
> > - addressed comments from v4 patchset.
> > - patch (1/6)
> > - DTS style is corrected and added required supplies in code/schema.
> > - schema block added to resolve below failure during 'dtbs_check'.
> > Unevaluated properties are not allowed ('dvdd075-usb-supply',
> > 'vdd18- usb20-supply', 'vdd33-usb20-supply' were unexpected.
> > - patch (2/6)
> > - removed usage_counter(take this later in subsequent patch-sets)
> > - patch (3/6)
> > - There are 3 types of the phys in this SoC.
> > - one is simmilar with exynos850 as mentioned in patch no.1.
> > - second supports only USB3.1 SSP+ and denoted in patch no 5
> > - third supports only USB2.0 HS as in patch3.
> > - hs phy in combo phy is "NOT" same as phy. (in patch no. 1)
> > - These three phys(usbdrd-phy, combo-hsphy, combo-ssphy) are totally
> > deferent, "NOT" same, hence added three compatible for three phys.
> > - patch (5/6)
> > - Since there are two phys in combo phy, explaination is given
> > in each patch.
> > link for v4:
> > https://lore.kernel.org/linux-phy/20250701120706.2219355-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Changes in v4:
> > - addressed comments from v3 patchset
> > - removed dts related patches, to be posted in new patchset.
> > - added regulator, pmu and power sequences.
> > - phy isol is shared across USBs, added usage counter to bypass or
> > enable phy isolation.
> > - modified schemas with hs and combo phy compatible names
> > (used "combo" to denote combo phy) and regulators
> > - modified code to work with binding and unbinding devices/drivers
> > - added "Reviewed-by" tag.
> > link for v3:
> > https://lore.kernel.org/linux-phy/20250613055613.866909-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Changes in v3:
> > - Updated dt-bindings for USB2.0 only.
> > - Added dt-bindings for combo phy.
> > - Added implementation for combo phy (SS and HS phy).
> > - Added added DTS nodes for all the phys
> > link for v2:
> > https://lore.kernel.org/linux-phy/20250516102650.2144487-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Changes in v2:
> > - Used standard GENMASK() and FIELD_GET() to get the major version
> > from controller version register.
> > link for v1:
> > https://lore.kernel.org/linux-phy/20250514134813.380807-1-
> > pritam.sutar@xxxxxxxxxxx/
> >
> > Pritam Manohar Sutar (6):
> > dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 HS phy
> > compatible
> > phy: exynos5-usbdrd: support HS phy for ExynosAutov920
> > dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo hsphy
> > phy: exynos5-usbdrd: support HS combo phy for ExynosAutov920
> > dt-bindings: phy: samsung,usb3-drd-phy: add ExynosAutov920 combo ssphy
> > phy: exynos5-usbdrd: support SS combo phy for ExynosAutov920
> >
> > .../bindings/phy/samsung,usb3-drd-phy.yaml | 48 ++
> > drivers/phy/samsung/phy-exynos5-usbdrd.c | 651 ++++++++++++++++++
> > include/linux/soc/samsung/exynos-regs-pmu.h | 3 +
> > 3 files changed, 702 insertions(+)
> >
> > --
> > 2.34.1
>
> Thank you,
>
> Regards,
> Pritam

Thank you.

Regards,
Pritam