Re: Re: [PATCH v6 3/3] PCI: dwc: Add no_suspport_L2 flag and skip PME_Turn_Off broadcast

[zhangsenchuan]

> -----Original Messages-----
> From: "Shawn Lin" <shawn.lin@xxxxxxxxxxxxxx>
> Send time:Friday, 21/11/2025 15:14:51
> To: zhangsenchuan <zhangsenchuan@xxxxxxxxxxxxxxxxxx>
> Cc: shawn.lin@xxxxxxxxxxxxxx, bhelgaas@xxxxxxxxxx, krzk+dt@xxxxxxxxxx, conor+dt@xxxxxxxxxx, lpieralisi@xxxxxxxxxx, kwilczynski@xxxxxxxxxx, robh@xxxxxxxxxx, p.zabel@xxxxxxxxxxxxxx, jingoohan1@xxxxxxxxx, gustavo.pimentel@xxxxxxxxxxxx, linux-pci@xxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, christian.bruel@xxxxxxxxxxx, mayank.rana@xxxxxxxxxxxxxxxx, shradha.t@xxxxxxxxxxx, krishna.chundru@xxxxxxxxxxxxxxxx, thippeswamy.havalige@xxxxxxx, inochiama@xxxxxxxxx, ningyu@xxxxxxxxxxxxxxxxxx, linmin@xxxxxxxxxxxxxxxxxx, pinkesh.vaghela@xxxxxxxxxxxxxx, ouyanghui@xxxxxxxxxxxxxxxxxx, Frank.li@xxxxxxx, "Manivannan Sadhasivam" <mani@xxxxxxxxxx>
> Subject: Re: [PATCH v6 3/3] PCI: dwc: Add no_suspport_L2 flag and skip PME_Turn_Off broadcast
> 
> 在 2025/11/21 星期五 14:48, zhangsenchuan 写道:
> > 
> > 
> > 
> >> -----Original Messages-----
> >> From: "Manivannan Sadhasivam" <mani@xxxxxxxxxx>
> >> Send time:Thursday, 20/11/2025 20:45:38
> >> To: zhangsenchuan@xxxxxxxxxxxxxxxxxx
> >> Cc: bhelgaas@xxxxxxxxxx, krzk+dt@xxxxxxxxxx, conor+dt@xxxxxxxxxx, lpieralisi@xxxxxxxxxx, kwilczynski@xxxxxxxxxx, robh@xxxxxxxxxx, p.zabel@xxxxxxxxxxxxxx, jingoohan1@xxxxxxxxx, gustavo.pimentel@xxxxxxxxxxxx, linux-pci@xxxxxxxxxxxxxxx, devicetree@xxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, christian.bruel@xxxxxxxxxxx, mayank.rana@xxxxxxxxxxxxxxxx, shradha.t@xxxxxxxxxxx, krishna.chundru@xxxxxxxxxxxxxxxx, thippeswamy.havalige@xxxxxxx, inochiama@xxxxxxxxx, ningyu@xxxxxxxxxxxxxxxxxx, linmin@xxxxxxxxxxxxxxxxxx, pinkesh.vaghela@xxxxxxxxxxxxxx, ouyanghui@xxxxxxxxxxxxxxxxxx, Frank.li@xxxxxxx
> >> Subject: Re: [PATCH v6 3/3] PCI: dwc: Add no_suspport_L2 flag and skip PME_Turn_Off broadcast
> >>
> >> On Thu, Nov 20, 2025 at 06:12:35PM +0800, zhangsenchuan@xxxxxxxxxxxxxxxxxx wrote:
> >>> From: Senchuan Zhang <zhangsenchuan@xxxxxxxxxxxxxxxxxx>
> >>>
> >>> The ESWIN EIC7700 soc does not support enter L2 link state. Therefore add
> >>> no_suspport_L2 flag skip PME_Turn_Off broadcast and link state check code,
> >>> other driver can reuse this flag if meet the similar situation.
> >>>
> >>> Signed-off-by: Yu Ning <ningyu@xxxxxxxxxxxxxxxxxx>
> >>> Signed-off-by: Yanghui Ou <ouyanghui@xxxxxxxxxxxxxxxxxx>
> >>> Signed-off-by: Senchuan Zhang <zhangsenchuan@xxxxxxxxxxxxxxxxxx>
> >>
> >> Does this patch work for you?
> >> https://lore.kernel.org/linux-pci/20251119-pci-dwc-suspend-rework-v1-1-aad104828562@xxxxxxxxxxxxxxxx/
> > 
> > if the PCIe link is not up, this suits me too, but if the PCIe link up,
> > our hardware does not support entering the L2 link state. At this point,
> 
> Per PCIe spec, 5.2 Link State Power Management:
> "L2/L3 Ready transition protocol support is required.
> The L2/L3 Ready state entry transition process must begin as soon as
> possible following the acknowledgment of a PME_Turn_Off Message, (i.e.,
> the injection of a PME_TO_Ack TLP). The Downstream component initiates
> L2/L3 Ready entry by sending a PM_Enter_L23 DLLP. "
> 
> "L2 support is optional, and dependent upon the presence of auxiliary power"
> 
> I interpret it as it is mandatory support for broadcast PME_Turn_Off and
> ack PME_TO_Ack, which is what the original code does. Then your IP can't
> really go into L2 for whatever reasons? Will your controller be broken 
> if acking PME_Turn_Off?  Otherwise we could still let L2/L3 Ready
> transstion happen and leave the device in L3 to save power.

Hi, Shawn

Thank you for your comment and explanation.
Our hardware cannot broadcast PME_Turn_Off. Otherwise, the controller will
have problems, the dbi register shows that it cannot be accesseded. The link
state cannot be read in the read_poll_timeout function.

Kind regards,
Senchuan Zhang

> 
> 
> > it is also necessary to skip the broadcast PME_Turn_Off message and wait
> > for L2 transition.
> > 
> > 
> >>
> >>> ---
> >>>   drivers/pci/controller/dwc/pcie-designware-host.c | 4 ++++
> >>>   drivers/pci/controller/dwc/pcie-designware.h      | 1 +
> >>>   2 files changed, 5 insertions(+)
> >>>
> >>> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> >>> index e92513c5bda5..a203577606e5 100644
> >>> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> >>> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> >>> @@ -1156,6 +1156,9 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
> >>>   	if (dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKCTL) & PCI_EXP_LNKCTL_ASPM_L1)
> >>>   		return 0;
> >>>
> >>> +	if (pci->no_suspport_L2)
> >>> +		goto stop_link;
> >>> +
> >>>   	if (pci->pp.ops->pme_turn_off) {
> >>>   		pci->pp.ops->pme_turn_off(&pci->pp);
> >>>   	} else {
> >>> @@ -1182,6 +1185,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
> >>>   	 */
> >>>   	udelay(1);
> >>>
> >>> +stop_link:
> >>>   	dw_pcie_stop_link(pci);
> >>>   	if (pci->pp.ops->deinit)
> >>>   		pci->pp.ops->deinit(&pci->pp);
> >>> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> >>> index e995f692a1ec..170a73299ce5 100644
> >>> --- a/drivers/pci/controller/dwc/pcie-designware.h
> >>> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> >>> @@ -539,6 +539,7 @@ struct dw_pcie {
> >>>   	 * use_parent_dt_ranges to true to avoid this warning.
> >>>   	 */
> >>>   	bool			use_parent_dt_ranges;
> >>> +	bool			no_suspport_L2;
> >>>   };
> >>>
> >>>   #define to_dw_pcie_from_pp(port) container_of((port), struct dw_pcie, pp)
> >>> --
> >>> 2.25.1
> >>>
> >>
> >> -- 
> >> மணிவண்ணன் சதாசிவம்