[PATCH 2/2] remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_READY is set

[Iuliana Prodan (OSS)]

From: Iuliana Prodan <iuliana.prodan@xxxxxxx>

The DSP suspend path currently waits unconditionally
for a suspend ack from the firmware.
This breaks firmwares that do not implement the
mailbox-based READY handshake, as the DSP never
responds and system suspend fails with -EBUSY.

The driver already uses the WAIT_FW_READY flag to
indicate that the firmware supports the READY
handshake at boot. Apply the same logic during
suspend: only wait for the suspend ack when the
firmware is expected to support it.

Signed-off-by: Iuliana Prodan <iuliana.prodan@xxxxxxx>
---
 drivers/remoteproc/imx_dsp_rproc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
index fc0470aa72c1..e25dbe32ef79 100644
--- a/drivers/remoteproc/imx_dsp_rproc.c
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -1327,10 +1327,11 @@ static int imx_dsp_suspend(struct device *dev)
 	}
 
 	/*
-	 * DSP need to save the context at suspend.
-	 * Here waiting the response for DSP, then power can be disabled.
+	 * The DSP must save its context during suspend.
+	 * Wait for a response from the DSP if required before disabling power.
 	 */
-	if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
+	if (priv->flags & WAIT_FW_READY &&
+	    !wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
 		return -EBUSY;
 
 out:
-- 
2.34.1