Re: [PATCH v15 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Update pcie phy bindings for qcs8300

[Rob Herring (Arm)]

On Fri, 28 Nov 2025 18:49:23 +0800, Ziyue Zhang wrote:
> The gcc_aux_clk is not required by the PCIe PHY on qcs8300 and is not
> specified in the device tree node. Hence, move the qcs8300 phy
> compatibility entry into the list of PHYs that require six clocks.
> 
> Removed the phy_aux clock from the PCIe PHY binding as it is no longer
> used by any instance.
> 
> Fixes: e46e59b77a9e ("dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the QCS8300 QMP PCIe PHY Gen4 x2")
> Signed-off-by: Ziyue Zhang <ziyue.zhang@xxxxxxxxxxxxxxxx>
> Acked-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
> Acked-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> Reviewed-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> ---
>  .../phy/qcom,sc8280xp-qmp-pcie-phy.yaml         | 17 ++---------------
>  1 file changed, 2 insertions(+), 15 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251128104928.4070050-2-ziyue.zhang@xxxxxxxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.