Re: [PATCH v2 1/2] dt-bindings: iommu: rockchip: Add support for multiple interface clocks

[Rob Herring (Arm)]

On Fri, 28 Nov 2025 15:13:21 +0800, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>
> 
> The iommu found on RK3576 NPU and RK3576 RKVDEC have 4 clock instead of
> 2 clock. Their clock names might differ, but I don't think that matters
> much.
> 
> Add support for them.
> 
> Signed-off-by: Chaoyi Chen <chaoyi.chen@xxxxxxxxxxxxxx>
> ---
> 
> Changes in v2:
> - Rewrite dt binding.
> 
>  .../bindings/iommu/rockchip,iommu.yaml        | 52 ++++++++++++++++---
>  1 file changed, 46 insertions(+), 6 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c263000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']
Documentation/devicetree/bindings/thermal/thermal-sensor.example.dtb: /example-0/soc/thermal-sensor@c265000: failed to match any schema with compatible: ['qcom,sdm845-tsens', 'qcom,tsens-v2']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20251128071322.92-2-kernel@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.