Re: [PATCH 7/7] arm64: dts: qcom: sm8750: Add support for camss

[Krzysztof Kozlowski]

On Wed, Nov 26, 2025 at 01:38:40AM -0800, Hangxiang Ma wrote:
 +
> +			cci1_1_default: cci1-1-default-state {
> +				sda-pins {
> +					pins = "gpio111";
> +					function = "cci_i2c_sda";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				scl-pins {
> +					pins = "gpio164";
> +					function = "cci_i2c_scl";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			cci1_1_sleep: cci1-1-sleep-state {
> +				sda-pins {
> +					pins = "gpio111";
> +					function = "cci_i2c_sda";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				scl-pins {
> +					pins = "gpio164";
> +					function = "cci_i2c_scl";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +			};
> +
> +			cci2_0_default: cci2-0-default-state {
> +				sda-pins {
> +					pins = "gpio112";
> +					function = "cci_i2c_sda";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				scl-pins {
> +					pins = "gpio153";
> +					function = "cci_i2c_scl";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			cci2_0_sleep: cci2-0-sleep-state {
> +				sda-pins {
> +					pins = "gpio112";
> +					function = "cci_i2c_sda";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				scl-pins {
> +					pins = "gpio153";
> +					function = "cci_i2c_scl";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +			};
> +
> +			cci2_1_default: cci2-1-default-state {
> +				sda-pins {
> +					pins = "gpio119";
> +					function = "cci_i2c_sda";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				scl-pins {
> +					pins = "gpio120";
> +					function = "cci_i2c_scl";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			cci2_1_sleep: cci2-1-sleep-state {
> +				sda-pins {
> +					pins = "gpio119";
> +					function = "cci_i2c_sda";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				scl-pins {
> +					pins = "gpio120";
> +					function = "cci_i2c_scl";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +			};
> +		};
> +
> +		cci0: cci@ac7b000 {

Looks completely mis-ordered/sorted. What are the nodes above and below?


> +			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
> +			reg = <0x0 0x0ac7b000 0x0 0x1000>;

Best regards,
Krzysztof