[PATCH 2/2] arm64: dts: qcom: sdm845-xiaomi-beryllium: Add placeholders and sort

[Robert Eckelmann via B4 Relay]

From: Robert Eckelmann <longnoserob@xxxxxxxxx>

We know these devices are present, most of them are supported by
downstream and close to the mainline kernels.

This is very handy when rebasing the integration tree with the support.

No functional changes.

Signed-off-by: Robert Eckelmann <longnoserob@xxxxxxxxx>
---
 .../dts/qcom/sdm845-xiaomi-beryllium-common.dtsi   | 23 +++++++++++++++-------
 1 file changed, 16 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 0fb1d7e724c4..0b219d0ff451 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -227,6 +227,10 @@ vreg_l26a_1p2: ldo26 {
 	};
 };
 
+&cci_i2c0 {
+	/* IMX363 @ 10 */
+};
+
 &cdsp_pas {
 	status = "okay";
 	firmware-name = "qcom/sdm845/beryllium/cdsp.mbn";
@@ -261,6 +265,18 @@ &ibb {
 	qcom,discharge-resistor-kohms = <300>;
 };
 
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
+
+	status = "okay";
+};
+
+&i2c5 {
+	/* TAS2559 @ 4C */
+};
+
 &lab {
 	regulator-min-microvolt = <4600000>;
 	regulator-max-microvolt = <6000000>;
@@ -311,13 +327,6 @@ &mss_pil {
 	firmware-name = "qcom/sdm845/beryllium/mba.mbn", "qcom/sdm845/beryllium/modem.mbn";
 };
 
-&ipa {
-	qcom,gsi-loader = "self";
-	memory-region = <&ipa_fw_mem>;
-	firmware-name = "qcom/sdm845/beryllium/ipa_fws.mbn";
-	status = "okay";
-};
-
 &pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";

-- 
2.52.0