Re: [PATCH v3 0/1] platform/x86: serial-multi-instantiate: ACPI example code

[Andy Shevchenko]

On Wed, Nov 26, 2025 at 04:17:40PM +0800, Baojun Xu wrote:
> The tas2781-hda supports multi-projects, In some projects,
> GpioInt was dropped due to no IRQ connection.

GpioInt()

> See the example code below:
> 
> But in smi_i2c_probe(), smi_spi_probe() (serial-multi-instantiate.c),
> if looking for IRQ by smi_get_irq() fails, it will return an error,
> will not add new device, and cause smi_probe to fail.

smi_probe()

> So need to add an exception case for these situations.
> BTW, this patch will take effect on both I2C and SPI devices.
> 
> Device (SPKR)
> {
>     Name (_ADR, One)
>     Name (_HID, "TXNW2781")
>     Method (_CRS, 0, NotSerialized)
>     {
>         Name (RBUF, ResourceTemplate ()
>         {
>             I2cSerialBusV2 (0x0038, ...)
>             I2cSerialBusV2 (0x0039, ...)
>             // GpioInt (Edge, ...) { 0x0000 }
>             //"GpioInt (...) {}" was commented out due to no IRQ connection.
>         })
>         Return (RBUF)
>     }
> }

And as Hans said, please fold this into the patch as part of the commit message.

-- 
With Best Regards,
Andy Shevchenko