Re: [PATCH 4/5] arm64: dts: ipq5332: Add CMN PLL node for networking hardware

[Konrad Dybcio]

On 11/28/25 9:40 AM, Luo Jie wrote:
> Add the CMN PLL node required for networking hardware operation on IPQ5332.
> The CMN PLL core runs at 6 GHz on this platform, differing from others like
> IPQ9574.
> 
> Configure the reference clock path where XO (48 MHz or 96 MHz) routes
> through the WiFi block's multiplier/divider to provide a stable 48 MHz
> reference to the CMN PLL.
> .XO (48 MHZ or 96 MHZ)-->WiFi (multiplier/divider)--> 48 MHZ to CMN PLL.
> 
> Signed-off-by: Luo Jie <jie.luo@xxxxxxxxxxxxxxxx>
> ---

[...]

> +		cmn_pll: clock-controller@9b000 {
> +			compatible = "qcom,ipq5332-cmn-pll";
> +			reg = <0x0009b000 0x800>;
> +			clocks = <&ref_48mhz_clk>,
> +				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
> +				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
> +			clock-names = "ref", "ahb", "sys";

1 a line, please

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad