Re: [PATCH V5 1/3] arm64: dts: qcom: sm8750: Add SDC2 nodes for sm8750 soc

[Sarthak Garg]

On 11/18/2025 4:33 PM, Konrad Dybcio wrote:
> On 11/12/25 8:12 AM, Sarthak Garg wrote:
> > Add SD Card host controller for sm8750 soc.
> >
> > Signed-off-by: Sarthak Garg <sarthak.garg@xxxxxxxxxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/qcom/sm8750.dtsi | 54 ++++++++++++++++++++++++++++
> >   1 file changed, 54 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > index 3f0b57f428bb..ba8c010226e1 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
> > @@ -2582,6 +2582,60 @@ data-pins {
> >   			};
> >   		};
> >   
> > +		sdhc_2: mmc@8804000 {
> > +			compatible = "qcom,sm8750-sdhci", "qcom,sdhci-msm-v5";
> > +			reg = <0x0 0x08804000 0x0 0x1000>;
> > +
> > +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> > +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> > +			interrupt-names = "hc_irq",
> > +					  "pwr_irq";
> > +
> > +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> > +				 <&gcc GCC_SDCC2_APPS_CLK>,
> > +				 <&rpmhcc RPMH_CXO_CLK>;
> > +			clock-names = "iface",
> > +				      "core",
> > +				      "xo";
> > +
> > +			interconnects = <&aggre2_noc MASTER_SDCC_2 QCOM_ICC_TAG_ALWAYS
> > +					&mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> > +					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> > +					&config_noc SLAVE_SDCC_2 QCOM_ICC_TAG_ACTIVE_ONLY>;
> Nit: the '&'s look better when they're aligned to the previous line
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
>
> Konrad


Sure will update in V6.

Regards,
Sarthak