[PATCH v5 4/5] i3c: dw: use FIELD_PREP for device address table macros

[adrianhoyin . ng]

From: Adrian Ng Ho Yin <adrianhoyin.ng@xxxxxxxxxx>

Add DEV_ADDR_TABLE_DYNAMIC_MASK / DEV_ADDR_TABLE_DYNAMIC_ADDR(x) for
dynamic device addresses and DEV_ADDR_TABLE_STATIC_MASK /
DEV_ADDR_TABLE_STATIC_ADDR(x) for static device addresses in the I3C
address table. Replace manual shift-and-mask with FIELD_PREP() for both
dynamic and static addresses for clarity and maintainability.

Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@xxxxxxxxxx>
---
 drivers/i3c/master/dw-i3c-master.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
index 8288888be591..1c1418d0a62a 100644
--- a/drivers/i3c/master/dw-i3c-master.c
+++ b/drivers/i3c/master/dw-i3c-master.c
@@ -205,12 +205,14 @@
 #define SLAVE_CONFIG			0xec
 
 #define DW_I3C_DEV_NACK_RETRY_CNT_MAX	0x3
+#define DEV_ADDR_TABLE_DYNAMIC_MASK		GENMASK(23, 16)
+#define DEV_ADDR_TABLE_STATIC_MASK		GENMASK(6, 0)
 #define DEV_ADDR_TABLE_IBI_MDB		BIT(12)
 #define DEV_ADDR_TABLE_SIR_REJECT	BIT(13)
 #define DEV_ADDR_TABLE_DEV_NACK_RETRY_CNT(x)	(((x) << 29) & GENMASK(30, 29))
 #define DEV_ADDR_TABLE_LEGACY_I2C_DEV	BIT(31)
-#define DEV_ADDR_TABLE_DYNAMIC_ADDR(x)	(((x) << 16) & GENMASK(23, 16))
-#define DEV_ADDR_TABLE_STATIC_ADDR(x)	((x) & GENMASK(6, 0))
+#define DEV_ADDR_TABLE_DYNAMIC_ADDR(x) FIELD_PREP(DEV_ADDR_TABLE_DYNAMIC_MASK, x)
+#define DEV_ADDR_TABLE_STATIC_ADDR(x) FIELD_PREP(DEV_ADDR_TABLE_STATIC_MASK, x)
 #define DEV_ADDR_TABLE_LOC(start, idx)	((start) + ((idx) << 2))
 
 #define I3C_BUS_SDR1_SCL_RATE		8000000
-- 
2.49.GIT