[PATCH 3/3] arm64: dts: qcom: milos-fairphone-fp6: Add vibrator support
From: Griffin Kroah-Hartman
Date: Thu Dec 04 2025 - 07:29:15 EST
Add the required node for haptic playback (Awinic AW86938)
Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
index 0a758fb7f4d413a84cdae695c38616fc6075db67..8c43bc9c1d8312f22ad0aeed84b23d52910e0ca6 100644
--- a/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
+++ b/arch/arm64/boot/dts/qcom/milos-fairphone-fp6.dts
@@ -717,6 +717,16 @@ vreg_l7p: ldo7 {
/* VL53L3 ToF @ 0x29 */
/* AW86938FCR vibrator @ 0x5a */
+ vibrator@5a {
+ compatible = "awinic,aw86938";
+ reg = <0x5a>;
+
+ interrupts-extended = <&tlmm 80 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&aw86938_int_default>;
+ pinctrl-names = "default";
+ };
};
&ipa {
@@ -907,6 +917,13 @@ sdc2_card_det_n: sdc2-card-det-state {
bias-pull-up;
};
+ aw86938_int_default: aw86938-int-default-state {
+ pins = "gpio80";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
pm8008_int_default: pm8008-int-default-state {
pins = "gpio125";
function = "gpio";
--
2.43.0