Re: [PATCH] arm64: dts: rockchip: add SPDIF audio to Beelink A1

[Alex Bee]

Hi Robin,

Am 03.12.25 um 17:21 schrieb Robin Murphy:
> [ Just noticed this... ]
>
> On 2025-08-28 5:43 pm, Christian Hewitt wrote:
> > From: Alex Bee <knaerzche@xxxxxxxxx>
> >
> > Add the required nodes to enable SPDIF audio output on
> > the Beelink A1 set-top-box.
>
> But the A1 doesn't have S/PDIF? Only HDMI plus a 3.5mm jack connected 
> to the analog audio codec (and possibly the composite TV out) :/
Yeah, sorry - this patch wasn't supposed to be submitted upstream.

Regards,

Alex

> Thanks,
> Robin.
>
> > Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
> > Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
> > ---
> >   arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 23 ++++++++++++++++++++++
> >   1 file changed, 23 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts 
> > b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
> > index f7c4578865c5..b276a29bdd85 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
> > +++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
> > @@ -58,6 +58,24 @@ ir-receiver {
> >           gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
> >           linux,rc-map-name = "rc-beelink-gs1";
> >       };
> > +
> > +    spdif_sound: spdif-sound {
> > +        compatible = "simple-audio-card";
> > +        simple-audio-card,name = "SPDIF";
> > +
> > +        simple-audio-card,cpu {
> > +            sound-dai = <&spdif>;
> > +        };
> > +
> > +        simple-audio-card,codec {
> > +            sound-dai = <&spdif_dit>;
> > +        };
> > +    };
> > +
> > +    spdif_dit: spdif-dit {
> > +        compatible = "linux,spdif-dit";
> > +        #sound-dai-cells = <0>;
> > +    };
> >   };
> >     &analog_sound {
> > @@ -325,6 +343,11 @@ &sdmmc {
> >       status = "okay";
> >   };
> >   +&spdif {
> > +    pinctrl-0 = <&spdifm0_tx>;
> > +    status = "okay";
> > +};
> > +
> >   &tsadc {
> >       rockchip,hw-tshut-mode = <0>;
> >       rockchip,hw-tshut-polarity = <0>;