Re: [PATCH] arm64: dts: qcom: hamoa-iot-evk: Add vbus regulator support for Type-A ports

[Konrad Dybcio]

On 12/8/25 9:51 AM, Krishna Kurapati wrote:
> The Multiport controller on Hamoa EVK platform is connected to Two Type-A
> ports. VBUS for each of these ports are provided by a TPS2559QWDRCTQ1
> regulator, controlled from PMIC GPIOs.
> 
> Add the necessary regulators and GPIO configuration to power these.
> 
> Signed-off-by: Krishna Kurapati <krishna.kurapati@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 37 ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> index 36dd6599402b..665983ed6714 100644
> --- a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>  
>  #include "hamoa-iot-som.dtsi"
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>  
>  / {
>  	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
> @@ -167,6 +168,26 @@ pmic_glink_ss2_con_sbu_in: endpoint {
>  		};
>  	};
>  
> +	regulator-usb3-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "USB3_VBUS";
> +		gpio = <&pm8550ve_9_gpios 4 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&usb3_en>;
> +		pinctrl-names = "default";
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
> +	regulator-usb6-vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "USB6_VBUS";
> +		gpio = <&pm8550ve_9_gpios 5 GPIO_ACTIVE_HIGH>;
> +		pinctrl-0 = <&usb6_en>;
> +		pinctrl-names = "default";
> +		enable-active-high;
> +		regulator-always-on;
> +	};
> +
>  	vreg_edp_3p3: regulator-edp-3p3 {

I just noticed - 'regulator-e'dp-3p3 < 'regulator-u'sbX-vbus..

Could you please resend and retain my rb?

Konrad