Re: [PATCH net] net: enetc: do not transmit redirected XDP frames when the link is down

From: Vladimir Oltean
Date: Tue Dec 09 2025 - 03:36:25 EST


On Fri, Dec 05, 2025 at 06:53:07PM +0800, Wei Fang wrote:
> In the current implementation, the enetc_xdp_xmit() always transmits
> redirected XDP frames even if the link is down, but the frames cannot
> be transmitted from TX BD rings when the link is down, so the frames
> are still kept in the TX BD rings. If the XDP program is uninstalled,
> users will see the following warning logs.
>
> fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear
>
> More worse, the TX BD ring cannot work properly anymore, because the
> HW PIR and CIR are not the same after the re-initialization of the TX
> BD ring.

I understand and I don't disagree that the TX BD ring doesn't work
anymore if we disable it while it has pending frames (the TB0MR[EN]
documentation says that this is unsafe too), but:
- I don't understand why the hardware PIR and CIR are not the same after
the TX ring reinitialization
- I don't understand how the effect and the claimed cause are connected

Could you please give more details what you mean here?

> And I see no reasons to transmit the redirected XDP frames
> when the link is down, so add a link status check to quickly fix this
> issue. However, this solution does not completely solve the problem,
> for example, if the link is broken during transmission and the TX BD
> ring still has unsent frames. I think this requires another patch to
> address this situation, but it will not conflict with the current
> solution and can coexist.
>
> Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT")
> Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> ---
> drivers/net/ethernet/freescale/enetc/enetc.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
> index 0535e92404e3..f410c245ea91 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> @@ -1778,7 +1778,8 @@ int enetc_xdp_xmit(struct net_device *ndev, int num_frames,
> int xdp_tx_bd_cnt, i, k;
> int xdp_tx_frm_cnt = 0;
>
> - if (unlikely(test_bit(ENETC_TX_DOWN, &priv->flags)))
> + if (unlikely(test_bit(ENETC_TX_DOWN, &priv->flags) ||
> + !netif_carrier_ok(ndev)))
> return -ENETDOWN;
>
> enetc_lock_mdio();
> --
> 2.34.1
>