[PATCH 1/2] LoongArch: dts: Describe PCI sideband IRQ through interrupt-extended

[Yao Zi]

SoC integrated peripherals on LS2K1000 and LS2K2000 could be discovered
as PCI devices, but require sideband interrupts to function, which are
previously described by interrupts and interrupt-parent properties.

However, pci/pci-device.yaml allows interrupts property to only specify
PCI INTx interrupts, not sideband ones. Convert these devices to use
interrupt-extended property, which describes sideband interrupts used by
PCI devices since dt-schema commit e6ea659d2baa ("schemas: pci-device:
Allow interrupts-extended for sideband interrupts"), eliminating
dtbs_check warnings.

Fixes: 30a5532a3206 ("LoongArch: dts: DeviceTree for Loongson-2K1000")
Signed-off-by: Yao Zi <me@xxxxxxxx>
---
 arch/loongarch/boot/dts/loongson-2k1000.dtsi | 25 ++++++---------
 arch/loongarch/boot/dts/loongson-2k2000.dtsi | 32 ++++++++------------
 2 files changed, 21 insertions(+), 36 deletions(-)

diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
index 60ab425f793f..eee06b84951c 100644
--- a/arch/loongarch/boot/dts/loongson-2k1000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi
@@ -437,54 +437,47 @@ pcie@1a000000 {
 
 			gmac0: ethernet@3,0 {
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
-					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc0 12 IRQ_TYPE_LEVEL_HIGH>,
+						      <&liointc0 13 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				status = "disabled";
 			};
 
 			gmac1: ethernet@3,1 {
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
-					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc0 14 IRQ_TYPE_LEVEL_HIGH>,
+						      <&liointc0 15 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
 				status = "disabled";
 			};
 
 			ehci0: usb@4,1 {
 				reg = <0x2100 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc1>;
-				interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc1 18 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			ohci0: usb@4,2 {
 				reg = <0x2200 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc1>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc1 19 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			display@6,0 {
 				reg = <0x3000 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc0>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc0 28 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			hda@7,0 {
 				reg = <0x3800 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc0>;
-				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc0 4 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			sata: sata@8,0 {
 				reg = <0x4000 0x0 0x0 0x0 0x0>;
-				interrupt-parent = <&liointc0>;
-				interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&liointc0 19 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
index 6c77b86ee06c..87c45f1f7cc7 100644
--- a/arch/loongarch/boot/dts/loongson-2k2000.dtsi
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -291,65 +291,57 @@ pcie@1a000000 {
 
 			gmac0: ethernet@3,0 {
 				reg = <0x1800 0x0 0x0 0x0 0x0>;
-				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>,
-					     <13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&pic 12 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 13 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
-				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			gmac1: ethernet@3,1 {
 				reg = <0x1900 0x0 0x0 0x0 0x0>;
-				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>,
-					     <15 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&pic 14 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 15 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
-				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			gmac2: ethernet@3,2 {
 				reg = <0x1a00 0x0 0x0 0x0 0x0>;
-				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
-					     <18 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&pic 17 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 18 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "macirq", "eth_lpi";
-				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			xhci0: usb@4,0 {
 				reg = <0x2000 0x0 0x0 0x0 0x0>;
-				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&pic>;
+				interrupts-extended = <&pic 48 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			xhci1: usb@19,0 {
 				reg = <0xc800 0x0 0x0 0x0 0x0>;
-				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&pic>;
+				interrupts-extended = <&pic 22 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			display@6,1 {
 				reg = <0x3100 0x0 0x0 0x0 0x0>;
-				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&pic>;
+				interrupts-extended = <&pic 28 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			i2s@7,0 {
 				reg = <0x3800 0x0 0x0 0x0 0x0>;
-				interrupts = <78 IRQ_TYPE_LEVEL_HIGH>,
-					     <79 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts-extended = <&pic 78 IRQ_TYPE_LEVEL_HIGH>,
+						      <&pic 79 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "tx", "rx";
-				interrupt-parent = <&pic>;
 				status = "disabled";
 			};
 
 			sata: sata@8,0 {
 				reg = <0x4000 0x0 0x0 0x0 0x0>;
-				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-parent = <&pic>;
+				interrupts-extended = <&pic 16 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
-- 
2.51.2