[PATCH] arm64: dts: qcom: ipq9574: Use 'usb-phy' for node names

[Alexandru Gagniuc]

The devicetree spec allows node names of "usb-phy". So be more
specific for the USB PHYs, and name the nodes "usb-phy" instead of
just "phy".

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 86c9cb9fffc98..4b8cbf1ff131b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -702,7 +702,7 @@ qpic_nand: spi@79b0000 {
 			status = "disabled";
 		};
 
-		usb_0_qusbphy: phy@7b000 {
+		usb_0_qusbphy: usb-phy@7b000 {
 			compatible = "qcom,ipq9574-qusb2-phy";
 			reg = <0x0007b000 0x180>;
 			#phy-cells = <0>;
@@ -716,7 +716,7 @@ usb_0_qusbphy: phy@7b000 {
 			status = "disabled";
 		};
 
-		usb_0_qmpphy: phy@7d000 {
+		usb_0_qmpphy: usb-phy@7d000 {
 			compatible = "qcom,ipq9574-qmp-usb3-phy";
 			reg = <0x0007d000 0xa00>;
 			#phy-cells = <0>;
-- 
2.45.1