Re: [PATCH RFC 1/4] dt-bindings: soc: spacemit: add k3 syscon compatible

[Rob Herring (Arm)]

On Thu, 11 Dec 2025 09:19:41 +0800, Yixun Lan wrote:
> The SpacemiT K3 SoC clock IP is scattered over several different blocks,
> which are APBC, APBS, APMU, DCIU, MPMU, all of them are capable of
> generating clock and reset signals. APMU and MPMU have additional Power
> Domain management functionality.
> 
> Following is a brief list that shows devices managed in each block:
> 
> APBC: UART, GPIO, PWM, SPI, TIMER, I2S, IR, DR, TSEN, IPC, CAN
> APBS: various PPL clocks control
> APMU: CCI, CPU, CSI, ISP, LCD, USB, QSPI, DMA, VPU, GPU, DSI, PCIe, EMAC..
> DCID: SRAM, DMA, TCM
> MPMU: various PLL1 derived clocks, UART, WATCHDOG, I2S
> 
> Signed-off-by: Yixun Lan <dlan@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/clock/spacemit,k1-pll.yaml |   9 +-
>  .../bindings/soc/spacemit/spacemit,k1-syscon.yaml  |  13 +-
>  include/dt-bindings/clock/spacemit,k3-clocks.h     | 390 +++++++++++++++++++++
>  3 files changed, 407 insertions(+), 5 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/clock/spacemit,k1-pll.yaml:14:7: [warning] wrong indentation: expected 4 but found 6 (indentation)

dtschema/dtc warnings/errors:

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20251211-k3-clk-v1-1-8ee47c70c5bc@xxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.