[PATCH v4 0/2] Add device tree for ASRock Rack ALTRAD8 BMC

[Rebecca Cran]

The ASRock Rack ALTRAD8 BMC is an Aspeed AST2500-based BMC for the
ALTRAD8UD-1L2T and ALTRAD8UD2-1L2Q boards with an Ampere Altra
processor. The BMC runs OpenBMC.

These patches add a device tree and binding for the BMC.

**Changes between v3 and v4**

- Re-added system fault LED after verifying it works with an
  LED connected to the AUX header.
- Fixed GPIOs based on Tan's feedback.
- Dropped DT schema commit in favour of Rob's changes.

**Testing**

Ran `make ARCH=arm CHECK_DTBS=y aspeed/aspeed-bmc-asrock-altrad8.dtb`.

Rebecca Cran (2):
  dt-bindings: arm: aspeed: add ASRock Rack ALTRAD8 board
  ARM: dts: aspeed: add device tree for ASRock Rack ALTRAD8 BMC

 Documentation/devicetree/bindings/arm/aspeed/aspeed.yaml |   1 +
 arch/arm/boot/dts/aspeed/Makefile                        |   1 +
 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-altrad8.dts   | 625 ++++++++++++++++++++
 3 files changed, 627 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-altrad8.dts

-- 
2.47.3