Re: [PATCH] arm64: dts: qcom: sdm845-oneplus: Enable known blocks and add placeholders

[David Heidelberg]

On 17/12/2025 13:04, Konrad Dybcio wrote:
> On 12/16/25 9:34 PM, David Heidelberg via B4 Relay wrote:
> > From: David Heidelberg <david@xxxxxxx>
> >
> > We know these devices are present; most of them are supported by
> > downstream and are close to the mainline kernels.
> >
> > This adds placeholders for:
> >   - front camera (imx371)
> >   - rear cameras (imx519, imx376k)
> >   - actuators
> >   - NFC node on i2c3
> >
> > This is very handy when rebasing the integration tree with
> > support for multiple different blocks at the same time.
> >
> > Signed-off-by: David Heidelberg <david@xxxxxxx>
> > ---
>
> [...]
>
> > +&i2c3 {
> > +	clock-frequency = <400000>;
> > +
> > +	status = "okay";
> > +
> > +	/* nxp,nxp-nci-i2c @28 */
>
> This seems fairly straightforward to enable - could you just
> do that instead?

I have patch for it in-tree, but most likely not correct. See notes in:

https://gitlab.com/sdm845/sdm845-next/-/commit/eeb765bb1166e020a771ed712fec76b56da229ee

For now, I can only confirm the device is on the i2c address.

David>
> Konrad