Re: [PATCH v2 0/3] media: qcom: camss: Add sm6150 camss support

[Krzysztof Kozlowski]

On Mon, Dec 22, 2025 at 04:28:38PM +0800, Wenmeng Liu wrote:
> SM6150 is a Qualcomm flagship SoC. This series adds support to
> the CSIPHY, CSID, VFE/RDI interfaces in SM6150.
> 
> The SM6150 platform provides:
>  - 2 x VFE (version 170), each with 3 RDI
>  - 1 x VFE Lite (version 170), each with 4 RDI
>  - 2 x CSID (version 170)
>  - 1 x CSID Lite (version 170)
>  - 3 x CSIPHY (version 2.0.0)
>  - 1 x BPS (Bayer Processing Segment)
>  - 1 x ICP (Imaging Control Processor)
>  - 1 x IPE (Image Postprocessing Engine)
>  - 1 x JPEG Encoder/Decoder
>  - 1 x LRME (Low Resolution Motion Estimation)
> 
> Tested on Talos EVK board.
> 
> Tested with following commands:
> media-ctl -d /dev/media0 --reset
> media-ctl -d /dev/media0 -V '"imx577 9-001a":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -d /dev/media0 -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -d /dev/media0 -l '"msm_csiphy1":1->"msm_csid0":0[1]'
> media-ctl -d /dev/media0 -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> yavta -B capture-mplane  -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 --capture=5
> 
> Changes in v2:
> - Add more resources(BPS, ICP, IPE, JPEG, LRME) and details for CAMSS.
> - Correct the order of the header files. - bob
> - Add Csiphy id num, improve the resource name. - Vladimir
> - Link to v1:
>   https://lore.kernel.org/all/20251016-sm6150-camss-v1-0-e7f64ac32370@xxxxxxxxxxxxxxxx/

So no changes done in response to what I asked?

Best regards,
Krzysztof