Re: [PATCH v2 5/6] arm64: dts: qcom: Add dts for Medion SPRCHRGD 14 S1

[Georg Gottleuber]

Am 22.12.25 um 01:32 schrieb Dmitry Baryshkov:
> On Thu, Dec 04, 2025 at 04:52:07PM +0100, Georg Gottleuber wrote:
>> Initial support for the Medion SPRCHRGD 14 S1, which is based on the
>> Qualcomm Snapdragon X Elite SoC (X1E78100).
>>
>> Working:
>> * Touchpad
>> * Keyboard
>> * eDP
>> * NVMe
>> * USB Type-C port
>> * USB-C DP altmode
>> * HDMI-A port
>> * WiFi
>> * Bluetooth
>> * GPU
>> * Video decoding
>> * USB Type-A
>> * Audio, speakers, microphones
>>         - 4x speakers.
>>         - 2x dmic
>>         - headset
>> * Camera
>> * Fingerprint reader
>>
>> Co-developed-by: Srinivas Kandagatla <srini@xxxxxxxxxx>
>> Signed-off-by: Srinivas Kandagatla <srini@xxxxxxxxxx>
>> Co-developed-by: Ettore Chimenti <ettore.chimenti@xxxxxxxxxx>
>> Signed-off-by: Ettore Chimenti <ettore.chimenti@xxxxxxxxxx>
>> Signed-off-by: Georg Gottleuber <ggo@xxxxxxxxxxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile             |    2 +
>>  .../qcom/x1e80100-medion-sprchrgd-14-s1.dts   | 1515 +++++++++++++++++
>>  2 files changed, 1517 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/x1e80100-medion-sprchrgd-14-s1.dts
> 
>> +
>> +&gpu {
>> +	status = "okay";
>> +
>> +	zap-shader {
>> +		firmware-name = "qcom/x1e80100/medion/qcdxkmsuc8380.mbn";
> 
> Please use the `qcom/SoC/Vendor/Device` path for the firmware. In your
> case it should be:
> 
> 		firmware-name = "qcom/x1e80100/Medion/sprchrgd-14-s1/qcdxkmsuc8380.mbn";
> 

Ack, but this patch was applied 2025-12-18. I assume there is no way to
change this before the merge into mainline, right?