Re: [PATCH v3 4/4] arm64: dts: qcom: glymur: Enable Glymur CRD board support

[Dmitry Baryshkov]

On Fri, Dec 19, 2025 at 08:16:57PM +0530, Pankaj Patil wrote:
> Add initial device tree support for the Glymur Compute Reference
> Device(CRD) board, with this board dts glymur crd can boot to shell
> with rootfs on nvme and uart21 as serial console
> 
> Features enabled are:
> - Regulators 0 - 4
> - Power supplies and sideband signals (PERST, WAKE, CLKREQ) for
>   PCIe3b/4/5/6 controllers and PHYs
> - QUPv3 instances
> - PMIC thermal-zone updates
> 
> Co-developed-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
> Signed-off-by: Kamal Wadhwa <kamal.wadhwa@xxxxxxxxxxxxxxxx>
> Co-developed-by: Qiang Yu <qiang.yu@xxxxxxxxxxxxxxxx>
> Signed-off-by: Qiang Yu <qiang.yu@xxxxxxxxxxxxxxxx>
> Co-developed-by: Sibi Sankar <sibi.sankar@xxxxxxxxxxxxxxxx>
> Signed-off-by: Sibi Sankar <sibi.sankar@xxxxxxxxxxxxxxxx>
> Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@xxxxxxxxxxxxxxxx>
> Signed-off-by: Pankaj Patil <pankaj.patil@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile       |   1 +
>  arch/arm64/boot/dts/qcom/glymur-crd.dts | 860 ++++++++++++++++++++++++++++++++
>  2 files changed, 861 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>


-- 
With best wishes
Dmitry