Re: [PATCH v2 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with displayport

[Krzysztof Kozlowski]

On 19/12/2025 12:32, Vishnu Saini wrote:
> Monaco-evk has LT8713sx which act as DP to 3 DP output
> converter. Edp PHY from monaco soc is connected to lt8713sx
> as input and output of lt8713sx is connected to 3 mini DP ports.
> 
> Two ports are available in mainboard and one port
> is available on Mezz board.
> 
> lt8713sx is connected to soc over i2c0 and with reset gpio
> connected to pin6 of ioexpander5.
> 
> Enable the edp nodes from monaco and enable lontium lt8713sx
> bridge node.


And how much time did you give to maintainers to respond to your
comments before sending v2?

You gave yourself 1 month. To the community you give 7 minutes.

That's just unacceptable.

NAK.

Best regards,
Krzysztof