Re: [PATCH v8 5/5] arm64: dts: qcom: monaco-evk-camera: Add DT overlay

[Konrad Dybcio]

On 12/22/25 10:59 AM, Nihal Kumar Gupta wrote:
> Monaco EVK board does not include a camera sensor in its default hardware
> configuration. Introducing a device tree overlay to support optional
> integration of the IMX577 sensor via CSIPHY1.
> 
> Camera reset is handled through an I2C expander, and power is enabled
> via TLMM GPIO74.
> 
> An example media-ctl pipeline for the imx577 is:
> 
> media-ctl --reset
> media-ctl -V '"imx577 3-001a":0[fmt:SRGGB10/4056x3040 field:none]'
> media-ctl -V '"msm_csiphy1":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]'
> media-ctl -l '"msm_csiphy1":1->"msm_csid0":0[1]'
> media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
> yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video1
> 
> Signed-off-by: Nihal Kumar Gupta <quic_nihalkum@xxxxxxxxxxx>
> Co-developed-by: Ravi Shankar <quic_rshankar@xxxxxxxxxxx>
> Signed-off-by: Ravi Shankar <quic_rshankar@xxxxxxxxxxx>
> Co-developed-by: Vishal Verma <quic_vishverm@xxxxxxxxxxx>
> Signed-off-by: Vishal Verma <quic_vishverm@xxxxxxxxxxx>
> Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad