Re: [PATCH 0/3] riscv: dts: spacemit: Add USB 3.0 support for K1

[Aurelien Jarno]

Hi,

On 2025-11-01 17:03, Ze Huang wrote:
> This patch series enables the DWC3 USB 3.0 host controller on the
> Spacemit K1 SoC, and enables it for the Banana Pi F3 board.
> 
> To make USB 3.0 work on the K1, we need patches for the USB2 PHY [1],
> ComboPHY [2], and DWC3 [3] driver, also, ensure enabling the following

Note that the CompoPHY part got merged in the meantime.

> configurations:
> 
> CONFIG_PHY_SPACEMIT_K1_USB2=y
> CONFIG_PHY_SPACEMIT_K1_PCIE=y
> CONFIG_USB_DWC3=y
> CONFIG_USB_ONBOARD_DEV=y
> 
> The series is based on v6.18-rc1.
> 
> Link: https://lore.kernel.org/all/20251017-k1-usb2phy-v6-0-7cf9ea2477a1@xxxxxxxxx/ [1]
> Link: https://lore.kernel.org/all/20251017190740.306780-1-elder@xxxxxxxxxxxx/ [2]
> Link: https://github.com/torvalds/linux/commit/e0b6dc00c701 [3]
> 
> Thanks,
> Ze Huang
> 
> Signed-off-by: Ze Huang <huang.ze@xxxxxxxxx>
> ---
> Ze Huang (3):
>       riscv: dts: spacemit: Add USB2 PHY node for K1
>       riscv: dts: spacemit: Add DWC3 USB 3.0 controller node for K1
>       riscv: dts: spacemit: Enable USB3.0 on BananaPi-F3
> 
>  arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 47 +++++++++++++++++++++++++
>  arch/riscv/boot/dts/spacemit/k1.dtsi            | 32 +++++++++++++++++
>  2 files changed, 79 insertions(+)

The whole series is:

Tested-by: Aurelien Jarno <aurelien@xxxxxxxxxxx>

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien@xxxxxxxxxxx                     http://aurel32.net