Re: [PATCH v10 5/5] arm64: dts: qcom: talos-evk: Add support for QCS615 talos evk board

[Dmitry Baryshkov]

On Tue, Dec 30, 2025 at 06:32:27PM +0530, Sudarshan Shetty wrote:
> Add the device tree for the QCS615-based Talos EVK platform. The
> platform is composed of a System-on-Module following the SMARC
> standard, and a Carrier Board.
> 
> The Carrier Board supports several display configurations, HDMI and
> LVDS. Both configurations use the same base hardware, with the display
> selection controlled by a DIP switch.
> 
> Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an
> overlay that disables HDMI and adds LVDS. The DTs file talos-evk
> can describe the HDMI display configurations.
> 
> The initial device tree includes support for:
> - CPU and memory
> - UART
> - GPIOs
> - Regulators
> - PMIC
> - Early console
> - AT24MAC602 EEPROM
> - MCP2515 SPI to CAN
> - ADV7535 DSI-to-HDMI bridge
> - DisplayPort interface
> - SN65DSI84ZXHR DSI-to-LVDS bridge
> - Wi-Fi/BT
> 
> Signed-off-by: Sudarshan Shetty <tessolveupstream@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   4 +
>  .../qcom/talos-evk-lvds-auo,g133han01.dtso    | 126 ++++
>  arch/arm64/boot/dts/qcom/talos-evk-som.dtsi   | 598 ++++++++++++++++++
>  arch/arm64/boot/dts/qcom/talos-evk.dts        | 139 ++++
>  4 files changed, 867 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds-auo,g133han01.dtso
>  create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-som.dtsi
>  create mode 100644 arch/arm64/boot/dts/qcom/talos-evk.dts
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>


-- 
With best wishes
Dmitry