Re: [PATCH v3] arm64: dts: qcom: hamoa-iot-evk: Add backlight support for eDP panel

[Bjorn Andersson]

On Wed, 12 Nov 2025 12:21:23 +0800, Yongxing Mou wrote:
> The backlight on the Hamoa IoT EVK is controlled through a PWM signal.
> Aligned with other x1e80100-based platforms: the PWM signal is controlled
> by PMK8550, and the backlight enable signal is handled by PMC8380.
> 
> Describe the backlight device and connect it to the eDP panel to allow
> for brightness control.
> 
> [...]

Applied, thanks!

[1/1] arm64: dts: qcom: hamoa-iot-evk: Add backlight support for eDP panel
      commit: 512716f69610d81db958b781132370731c69e874

Best regards,
-- 
Bjorn Andersson <andersson@xxxxxxxxxx>