Re: [PATCH v2 2/4] arm64: dts: qcom: talos: Add CCI definitions

[Vladimir Zapolskiy]

On 1/6/26 11:39, Wenmeng Liu wrote:
> Qualcomm Talos SoC contains single controller,
> containing 2 I2C hosts.
>
> Signed-off-by: Wenmeng Liu <wenmeng.liu@xxxxxxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/qcom/talos.dtsi | 72 +++++++++++++++++++++++++++++++++++++
>   1 file changed, 72 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/talos.dtsi b/arch/arm64/boot/dts/qcom/talos.dtsi
> index e1dfaff9b6bf8641b19a685e74d60ad4e1e99d41..461a39968d928260828993ff3549aa15fd1870df 100644
> --- a/arch/arm64/boot/dts/qcom/talos.dtsi
> +++ b/arch/arm64/boot/dts/qcom/talos.dtsi
> @@ -1549,6 +1549,42 @@ tlmm: pinctrl@3100000 {
>   			#interrupt-cells = <2>;
>   			wakeup-parent = <&pdc>;
>   
> +			cci_default: cci0-default-state {
> +				cci_i2c0_default: cci-i2c0-default-pins {
> +					/* SDA, SCL */
> +					pins = "gpio32", "gpio33";
> +					function = "cci_i2c";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				cci_i2c1_default: cci-i2c1-default-pins {
> +					/* SDA, SCL */
> +					pins = "gpio34", "gpio35";
> +					function = "cci_i2c";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
> +			cci_sleep: cci-sleep-state {
> +				cci_i2c0_sleep: cci-i2c0-sleep-state {
> +					/* SDA, SCL */
> +					pins = "gpio32", "gpio33";
> +					function = "cci_i2c";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +
> +				cci_i2c1_sleep: cci-i2c1-sleep-state {
> +					/* SDA, SCL */
> +					pins = "gpio34", "gpio35";
> +					function = "cci_i2c";
> +					drive-strength = <2>;
> +					bias-pull-down;
> +				};
> +			};
> +
>   			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
>   				pins = "gpio4", "gpio5";
>   				function = "qup0";
> @@ -3785,6 +3821,42 @@ videocc: clock-controller@ab00000 {
>   			#power-domain-cells = <1>;
>   		};
>   
> +		cci: cci@ac4a000 {
> +			compatible = "qcom,sm6150-cci", "qcom,msm8996-cci";
> +
> +			reg = <0x0 0x0ac4a000  0x0 0x4000>;
> +			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
> +			power-domains = <&camcc TITAN_TOP_GDSC>;
> +			clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
> +				 <&camcc CAM_CC_CPAS_AHB_CLK>,
> +				 <&camcc CAM_CC_CCI_CLK>;
> +			clock-names = "soc_ahb",
> +				      "cpas_ahb",
> +				      "cci";
> +			pinctrl-0 = <&cci_default>;
> +			pinctrl-1 = <&cci_sleep>;
> +			pinctrl-names = "default", "sleep";
> +
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			status = "disabled";
> +
> +			cci_i2c0: i2c-bus@0 {
> +				reg = <0>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +
> +			cci_i2c1: i2c-bus@1 {
> +				reg = <1>;
> +				clock-frequency = <1000000>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +			};
> +		};
> +
>   		camss: isp@acb3000 {
>   			compatible = "qcom,sm6150-camss";
>   

After making the changes asked by Dmitry

Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@xxxxxxxxxx>

--
Best wishes,
Vladimir