Re: [PATCH RFC net-next 3/6] net: hibmcge: create a software node for phy_led

[Andrew Lunn]

On Wed, Jan 07, 2026 at 06:09:28PM +0800, Jijie Shao wrote:
> 
> on 2025/12/16 15:17, Andrew Lunn wrote:
> > On Mon, Dec 15, 2025 at 08:57:02PM +0800, Jijie Shao wrote:
> > 
> > > +int hbg_mdio_init(struct hbg_priv *priv)
> > > +{
> > > +	struct device *dev = &priv->pdev->dev;
> > > +	struct hbg_mac *mac = &priv->mac;
> > >   	struct mii_bus *mdio_bus;
> > >   	int ret;
> > > @@ -281,7 +389,7 @@ int hbg_mdio_init(struct hbg_priv *priv)
> > >   	mdio_bus->parent = dev;
> > >   	mdio_bus->priv = priv;
> > > -	mdio_bus->phy_mask = ~(1 << mac->phy_addr);
> > > +	mdio_bus->phy_mask = 0xFFFFFFFF; /* not scan phy device */
> > >   	mdio_bus->name = "hibmcge mii bus";
> > >   	mac->mdio_bus = mdio_bus;
> > I think you are taking the wrong approach.
> > 
> > Please consider trying to use of_mdiobus_register(). Either load a DT
> > overlay, or see if you can construct a tree of properties as you have
> > been doing, and pass it to of_mdiobus_register(). You then don't need
> > to destroy and create PHY devices.
> 
> This is not easy.
> `of_mdiobus_register()` requires a device_node, but I currently don't have one.
> It is precisely because there is no DT or ACPI node that I am using a software node as a substitute.

Which is why i suggested DT overlay.

drivers/misc/lan966x_pci.dtso

	Andrew