[PATCH 1/5] dt-bindings: backlight: qcom-wled: Document ovp values for PMI8950

[Barnabás Czémán]

Document ovp values supported by wled found in PMI8950.

Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx>
---
 .../bindings/leds/backlight/qcom-wled.yaml           | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
index a8490781011d..306fb6642617 100644
--- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -98,8 +98,6 @@ properties:
     description: |
       Over-voltage protection limit. This property is for WLED4 only.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 18100, 19600, 29600, 31100 ]
-    default: 29600
 
   qcom,num-strings:
     description: |
@@ -239,6 +237,24 @@ allOf:
           minimum: 0
           maximum: 4095
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,pmi8950-wled
+
+    then:
+      properties:
+        qcom,ovp-millivolt:
+          enum: [ 17800, 19400, 29500, 31000 ]
+          default: 29500
+
+    else:
+      properties:
+        qcom,ovp-millivolt:
+          enum: [ 18100, 19600, 29600, 31100 ]
+          default: 29600
+
 required:
   - compatible
   - reg

-- 
2.52.0