[PATCH] arm64: dts: qcom: sdm630: Add LPASS LPI TLMM

[Nickolay Goppen]

From: Richard Acayan <mailingradian@xxxxxxxxx>

The LPASS LPI TLMM pin controller controls pins for use by the analog
and digital codecs, such as the PDM bus, the digital microphone pins,
and the compander pins. Add it to support the codecs.

Signed-off-by: Richard Acayan <mailingradian@xxxxxxxxx>
Co-developed-by: Nickolay Goppen <setotau@xxxxxxxxxxxxxx>
Signed-off-by: Nickolay Goppen <setotau@xxxxxxxxxxxxxx>
---
This is a patch introducing support SDM660 LPASS LPI driver support in
the dts
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 73 ++++++++++++++++++++++++++++++++++++
 1 file changed, 73 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index e38d9648a1ac..4a72e0718fe4 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -2269,6 +2269,79 @@ mmss_smmu: iommu@cd00000 {
 			status = "disabled";
 		};
 
+		lpi_tlmm: pinctrl@15070000 {
+			compatible = "qcom,sdm660-lpass-lpi-pinctrl";
+			reg = <0x15070000 0x20000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpi_tlmm 0 0 32>;
+
+			cdc_pdm_default: cdc-pdm-default-state {
+				clk-pins {
+					pins = "gpio18";
+					function = "pdm_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				sync-pins {
+					pins = "gpio19";
+					function = "pdm_sync";
+					drive-strength = <4>;
+					output-high;
+				};
+
+				tx-pins {
+					pins = "gpio20";
+					function = "pdm_tx";
+					drive-strength = <8>;
+				};
+
+				rx-pins {
+					pins = "gpio21", "gpio23", "gpio25";
+					function = "pdm_rx";
+					drive-strength = <4>;
+					output-high;
+				};
+			};
+
+			cdc_comp_default: cdc-comp-default-state {
+				pins = "gpio22", "gpio24";
+				function = "comp_rx";
+				drive-strength = <8>;
+			};
+
+			cdc_dmic_default: cdc-dmic-default-state {
+				dmic1-clk-pins {
+					pins = "gpio26";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				dmic1-data-pins {
+					pins = "gpio27";
+					function = "dmic1_data";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				dmic2-clk-pins {
+					pins = "gpio28";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					input-enable;
+				};
+
+				dmic2-data-pins {
+					pins = "gpio29";
+					function = "dmic2_data";
+					drive-strength = <8>;
+					input-enable;
+				};
+			};
+		};
+
 		adsp_pil: remoteproc@15700000 {
 			compatible = "qcom,sdm660-adsp-pas";
 			reg = <0x15700000 0x4040>;

---
base-commit: f417b7ffcbef7d76b0d8860518f50dae0e7e5eda
change-id: 20260109-qcom-sdm660-lpass-lpi-dts-cf9164069394

Best regards,
-- 
Nickolay Goppen <setotau@xxxxxxxxxxxxxx>