Re: [PATCH RESEND net-next v6 0/3] Add DWMAC glue driver for Motorcomm YT6801

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Fri,  9 Jan 2026 09:34:43 +0000 you wrote:
> This series adds glue driver for Motorcomm YT6801 PCIe ethernet
> controller, which is considered mostly compatible with DWMAC-4 IP by
> inspecting the register layout[1]. It integrates a Motorcomm YT8531S PHY
> (confirmed by reading PHY ID) and GMII is used to connect the PHY to
> MAC[2].
> 
> The initialization logic of the MAC is mostly based on previous upstream
> effort for the controller[3] and the Deepin-maintained downstream Linux
> driver[4] licensed under GPL-2.0 according to its SPDX headers. However,
> this series is a completely re-write of the previous patch series,
> utilizing the existing DWMAC4 driver and introducing a glue driver only.
> 
> [...]

Here is the summary with links:
  - [RESEND,net-next,v6,1/3] net: phy: motorcomm: Support YT8531S PHY in YT6801 Ethernet controller
    https://git.kernel.org/netdev/net-next/c/365e649361cd
  - [RESEND,net-next,v6,2/3] net: stmmac: Add glue driver for Motorcomm YT6801 ethernet controller
    https://git.kernel.org/netdev/net-next/c/02ff155ea281
  - [RESEND,net-next,v6,3/3] MAINTAINERS: Assign myself as maintainer of Motorcomm DWMAC glue driver
    https://git.kernel.org/netdev/net-next/c/40ca42c8429b

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html