[PATCH v5 4/9] spi: add multi_lane_mode field to struct spi_transfer
From: David Lechner
Date: Mon Jan 12 2026 - 12:46:35 EST
Add a new multi_lane_mode field to struct spi_transfer to allow
peripherals that support multiple SPI lanes to be used with a single
SPI controller.
This requires both the peripheral and the controller to have multiple
serializers connected to separate data lanes. It could also be used with
a single controller and multiple peripherals that are functioning as a
single logical device (similar to parallel memories).
Acked-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
Acked-by: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
Signed-off-by: David Lechner <dlechner@xxxxxxxxxxxx>
---
v4 changes:
* Shortened commit message (useful info will be in docs instead).
* Added whitespace to create clear grouping of macros and the field.
v3 changes:
* Renamed "buses" to "lanes" to reflect devicetree property name change.
---
include/linux/spi/spi.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 7aff60ab257e..eba7ae8466ac 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -981,6 +981,8 @@ struct spi_res {
* (SPI_NBITS_SINGLE) is used.
* @rx_nbits: number of bits used for reading. If 0 the default
* (SPI_NBITS_SINGLE) is used.
+ * @multi_lane_mode: How to serialize data on multiple lanes. One of the
+ * SPI_MULTI_LANE_MODE_* values.
* @len: size of rx and tx buffers (in bytes)
* @speed_hz: Select a speed other than the device default for this
* transfer. If 0 the default (from @spi_device) is used.
@@ -1117,6 +1119,12 @@ struct spi_transfer {
unsigned cs_change:1;
unsigned tx_nbits:4;
unsigned rx_nbits:4;
+
+#define SPI_MULTI_LANE_MODE_SINGLE 0 /* only use single lane */
+#define SPI_MULTI_LANE_MODE_STRIPE 1 /* one data word per lane */
+#define SPI_MULTI_LANE_MODE_MIRROR 2 /* same word sent on all lanes */
+ unsigned multi_lane_mode: 2;
+
unsigned timestamped:1;
bool dtr_mode;
#define SPI_NBITS_SINGLE 0x01 /* 1-bit transfer */
--
2.43.0