[PATCH v2] media: ccs: Accommodate C-PHY into the calculation

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@xxxxxxx>

We need to set correct mode for PLL to calculate correct frequency.
Signalling mode is known at this point, so use it for that.

Fixes: 47b6eaf36eba ("media: ccs-pll: Differentiate between CSI-2 D-PHY and C-PHY")
Signed-off-by: David Heidelberg <david@xxxxxxx>
---
Changes in v2:
- Account for CCP2 which PLL calculation handled same way as D-PHY.
- Add default statement for error handling. (Mehdi)
- Link to v1: https://lore.kernel.org/r/20260106-ccs-account-for-cphy-v1-1-c3639d606271@xxxxxxx
---
 drivers/media/i2c/ccs/ccs-core.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ccs/ccs-core.c b/drivers/media/i2c/ccs/ccs-core.c
index f8523140784c7..c1fff4029b5bd 100644
--- a/drivers/media/i2c/ccs/ccs-core.c
+++ b/drivers/media/i2c/ccs/ccs-core.c
@@ -3425,7 +3425,22 @@ static int ccs_probe(struct i2c_client *client)
 	sensor->scale_m = CCS_LIM(sensor, SCALER_N_MIN);
 
 	/* prepare PLL configuration input values */
-	sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY;
+	switch (sensor->hwcfg.csi_signalling_mode) {
+	case CCS_CSI_SIGNALING_MODE_CSI_2_CPHY:
+		sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_CPHY;
+		break;
+	case CCS_CSI_SIGNALING_MODE_CSI_2_DPHY:
+	case SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK;
+	case SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE:
+		sensor->pll.bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY;
+		break;
+	default:
+		dev_err(&client->dev, "unsupported signalling mode %u\n",
+			sensor->hwcfg.csi_signalling_mode);
+		rval = -EINVAL;
+		goto out_cleanup;
+
+	}
 	sensor->pll.csi2.lanes = sensor->hwcfg.lanes;
 	if (CCS_LIM(sensor, CLOCK_CALCULATION) &
 	    CCS_CLOCK_CALCULATION_LANE_SPEED) {

---
base-commit: f96074c6d01d8a5e9e2fccd0bba5f2ed654c1f2d
change-id: 20260106-ccs-account-for-cphy-af9788b6029f

Best regards,
-- 
David Heidelberg <david@xxxxxxx>