[PATCH v4 1/2] arm64: dts: ti: k3-j784s4-main.dtsi: Sort the nodes in appropriate order
From: Abhash Kumar Jha
Date: Mon Jan 12 2026 - 03:52:48 EST
The device tree nodes should be ordered by unit addresses in ascending
order.
Correct the order by moving the dsp node at the end as it has a higher unit
address.
Signed-off-by: Abhash Kumar Jha <a-kumar2@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 26 +++++++++++-----------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 0160fe0da983..5b7830a3c097 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -6,19 +6,6 @@
*/
&cbass_main {
- c71_3: dsp@67800000 {
- compatible = "ti,j721s2-c71-dsp";
- reg = <0x00 0x67800000 0x00 0x00080000>,
- <0x00 0x67e00000 0x00 0x0000c000>;
- reg-names = "l2sram", "l1dram";
- resets = <&k3_reset 40 1>;
- firmware-name = "j784s4-c71_3-fw";
- ti,sci = <&sms>;
- ti,sci-dev-id = <40>;
- ti,sci-proc-ids = <0x33 0xff>;
- status = "disabled";
- };
-
pcie2_rc: pcie@2920000 {
compatible = "ti,j784s4-pcie-host";
reg = <0x00 0x02920000 0x00 0x1000>,
@@ -113,6 +100,19 @@ serdes2: serdes@5020000 {
status = "disabled";
};
};
+
+ c71_3: dsp@67800000 {
+ compatible = "ti,j721s2-c71-dsp";
+ reg = <0x00 0x67800000 0x00 0x00080000>,
+ <0x00 0x67e00000 0x00 0x0000c000>;
+ reg-names = "l2sram", "l1dram";
+ resets = <&k3_reset 40 1>;
+ firmware-name = "j784s4-c71_3-fw";
+ ti,sci = <&sms>;
+ ti,sci-dev-id = <40>;
+ ti,sci-proc-ids = <0x33 0xff>;
+ status = "disabled";
+ };
};
&scm_conf {
--
2.34.1