[PATCH v2] serial: 8250_pci: Fix broken RS485 for F81504/508/512

[Marnix Rijnart]

v1: https://patch.msgid.link/20250923221756.26770-1-marnix.rijnart@xxxxxxxx
Changes: 
 * Added fixes tags
 * Cc stable

Commit 4afeced ("serial: core: fix sanitizing check for RTS settings")
introduced a regression making it impossible to unset
SER_RS485_RTS_ON_SEND from userspace if SER_RS485_RTS_AFTER_SEND is
unsupported. Because these devices need RTS to be low on TX (fecf27a)
they are effectively broken.

The hardware supports both RTS_ON_SEND and RTS_AFTER_SEND,
so fix this by announcing support for SER_RS485_RTS_AFTER_SEND,
similar to commit 068d35a.

Fixes: 4afeced55baa ("serial: core: fix sanitizing check for RTS settings")
Fixes: fecf27a373f5 ("serial: 8250_pci: add RS485 for F81504/508/512")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Marnix Rijnart <marnix.rijnart@xxxxxxxx>
---
 drivers/tty/serial/8250/8250_pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 152f914c599d..a9da222bd174 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1645,7 +1645,7 @@ static int pci_fintek_rs485_config(struct uart_port *port, struct ktermios *term
 }
 
 static const struct serial_rs485 pci_fintek_rs485_supported = {
-	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND,
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
 	/* F81504/508/512 does not support RTS delay before or after send */
 };
 
-- 
2.52.0