[PATCH net-next v5 1/2] dt-bindings: net: dsa: lantiq,gswip: add MaxLinear R(G)MII slew rate
From: A. Sverdlin
Date: Wed Jan 14 2026 - 05:46:06 EST
From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxxxx>
Add new maxlinear,slew-rate-txc and maxlinear,slew-rate-txd uint32
properties. The properties are only applicable for ports in R(G)MII mode
and allow for slew rate reduction in comparison to "normal" default
configuration with the purpose to reduce radiated emissions.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxxxx>
---
Changelog:
v5:
- improved options' descriptions on Rob's suggestions
v4:
- separate properties for TXD and TXC pads ("maxlinear," prefix re-appears)
v3:
- use [pinctrl] standard "slew-rate" property as suggested by Rob
https://lore.kernel.org/all/20251219204324.GA3881969-robh@xxxxxxxxxx/
v2:
- unchanged
.../bindings/net/dsa/lantiq,gswip.yaml | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
index 205b683849a53..37d64b8a76ac7 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
@@ -106,6 +106,28 @@ patternProperties:
unevaluatedProperties: false
properties:
+ maxlinear,slew-rate-txc:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ RMII/RGMII TX Clock Slew Rate:
+
+ 0: Normal
+ 1: Slow
+
+ If not present, the configuration made by the switch bootloader is
+ preserved.
+ maxlinear,slew-rate-txd:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description: |
+ RMII/RGMII TX Non-Clock PAD Slew Rate:
+
+ 0: Normal
+ 1: Slow
+
+ If not present, the configuration made by the switch bootloader is
+ preserved.
maxlinear,rmii-refclk-out:
type: boolean
description:
--
2.52.0