[PATCH v2 00/13] iio: pressure: mprls0025pa: driver code cleanup

[Petre Rodan]

This series contains a collection of patches to the MPR sensor based
on feedback I received for other drivers.

major changes:
 - trigger flag fix (define edge direction only in the device tree)
 - fix SPI timing violation
 - fix scan_type struct
 - fix pressure calculation
    (does not affect users that define a sensor via the pressure-triplet)
 - stricter check for the status byte + better error return levels
 - drop the use of devm_kzalloc()
 - stick to the datasheet parameters while performing the measurement
    sequence

minor changes:
 - includes added and removed
 - rename generic 'buffer' variable to 'rx_buf'

I still included the memset patch for the reasons described in the v1 thread.
if you strongly consider that patch inadequate then please skip it.

Tested on two sensors - MPRLS0015PA0000SA and MPRLS0001BA00001A

Datasheet: https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/micropressure-mpr-series/documents/sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf?download=false
Signed-off-by: Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>
---
Changes in v2:
- reordered patches based on Marcelo's input
- implemented code changes based on Marcelo and Jonathan's reviews
- Link to v1: https://lore.kernel.org/r/20251218-mprls_cleanup-v1-0-b36a170f1a5c@xxxxxxxxxxxxxxx

---
Petre Rodan (13):
      iio: pressure: mprls0025pa: fix spi_transfer struct initialisation
      iio: pressure: mprls0025pa: fix SPI CS delay violation
      iio: pressure: mprls0025pa: fix interrupt flag
      iio: pressure: mprls0025pa: fix scan_type struct
      iio: pressure: mprls0025pa: fix pressure calculation
      iio: pressure: mprls0025pa: cleanup includes
      iio: pressure: mprls0025pa: remove redundant declarations
      iio: pressure: mprls0025pa: rename buffer variable
      iio: pressure: mprls0025pa: introduce tx buffer
      iio: pressure: mprls0025pa: move memset to core
      iio: pressure: mprls0025pa: stricter checks for the status byte
      iio: pressure: mprls0025pa: change measurement sequence
      iio: pressure: mprls0025pa: add copyright line

 drivers/iio/pressure/mprls0025pa.c     | 112 +++++++++++++++------------------
 drivers/iio/pressure/mprls0025pa.h     |  15 ++---
 drivers/iio/pressure/mprls0025pa_i2c.c |  13 +---
 drivers/iio/pressure/mprls0025pa_spi.c |  41 +++++-------
 4 files changed, 73 insertions(+), 108 deletions(-)
---
base-commit: f9e05791642810a0cf6237d39fafd6fec5e0b4bb
change-id: 20251215-mprls_cleanup-01de8971b439

Best regards,
-- 
Petre Rodan <petre.rodan@xxxxxxxxxxxxxxx>