Re: [PATCH v7 05/10] nvmem: qcom-spmi-sdam: Migrate to devm_spmi_subdevice_alloc_and_add()

[Andy Shevchenko]

On Wed, Jan 14, 2026 at 09:39:52AM +0100, AngeloGioacchino Del Regno wrote:
> Some Qualcomm PMICs integrate a SDAM device, internally located in
> a specific address range reachable through SPMI communication.
> 
> Instead of using the parent SPMI device (the main PMIC) as a kind
> of syscon in this driver, register a new SPMI sub-device for SDAM
> and initialize its own regmap with this sub-device's specific base
> address, retrieved from the devicetree.
> 
> This allows to stop manually adding the register base address to
> every R/W call in this driver, as this can be, and is now, handled
> by the regmap API instead.

...

> +	struct regmap_config sdam_regmap_config = {
> +		.reg_bits = 16,
> +		.val_bits = 8,

> +		.max_register = 0x100,

Are you sure? This might be a bad naming, but here max == the last accessible.
I bet it has to be 0xff (but since the address is 16-bit it might be actually
257 registers, but sounds very weird).

> +		.fast_io = true,
> +	};

...

> +	rc = of_property_read_u32(dev->of_node, "reg", &sdam_regmap_config.reg_base);

Why not device_property_read_u32(dev, ...) ?

...

> +	sdam->regmap = devm_regmap_init_spmi_ext(&sub_sdev->sdev, &sdam_regmap_config);
> +	if (IS_ERR(sdam->regmap))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(sdam->regmap),

You have "dev".

> +				     "Failed to get regmap handle\n");

-- 
With Best Regards,
Andy Shevchenko