[PATCH] dt-bindings: phy: sc8280xp-qmp-pcie: Disallow bifurcation register on Purwa

[Konrad Dybcio]

From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Neither of the two Gen4x4 PHYs found on Purwa supports bifurcation.
The PHY is however physically laid out as if it were to, since there
are two separate ports (A/B).

Split out a new if-then block to un-require the bifurcation register
handle to squash this warning:

purwa-iot-evk.dtb: phy@1bd4000 (qcom,x1p42100-qmp-gen4x4-pcie-phy): 'qcom,4ln-config-sel' is a required property

Fixes: 2e1ffd4c1805 ("dt-bindings: phy: qcom,qmp-pcie: Add X1P42100 PCIe Gen4x4 PHY")
Reported-by: Rob Herring <robh@xxxxxxxxxx>
Closes: https://lore.kernel.org/linux-arm-msm/176857775469.1631885.16133311938753588148.robh@xxxxxxxxxx/
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index 3a35120a77ec..431e8cb5df84 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -136,13 +136,22 @@ allOf:
           items:
             - description: port a
             - description: port b
-      required:
-        - qcom,4ln-config-sel
     else:
       properties:
         reg:
           maxItems: 1
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+              - qcom,x1e80100-qmp-gen4x4-pcie-phy
+    then:
+      required:
+        - qcom,4ln-config-sel
+
   - if:
       properties:
         compatible:

---
base-commit: 46fe65a2c28ecf5df1a7475aba1f08ccf4c0ac1b
change-id: 20260119-topic-purwa_phy_shutup_warning-891e8aab29f2

Best regards,
-- 
Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>