Re: [PATCH v1 2/8] dt-bindings: iio: dac: maxim,ds4424: add maxim,rfs-ohms property

[Krzysztof Kozlowski]

On Mon, Jan 19, 2026 at 07:24:18PM +0100, Oleksij Rempel wrote:
> Introduce the 'maxim,rfs-ohms' property. The full-scale output current
> of these DACs is determined by external resistors (Rfs) connected to
> the FS pins. The driver requires the physical resistance values to
> calculate the correct current scale (Amps per step) for the IIO
> subsystem.
> 
> Keep it optional to avoid forcing updates of existing DTs; without it
> the driver cannot derive a correct IIO scale.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/dac/maxim,ds4424.yaml     | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> index efe63e6cb55d..b7af8464a4fc 100644
> --- a/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> +++ b/Documentation/devicetree/bindings/iio/dac/maxim,ds4424.yaml
> @@ -27,6 +27,17 @@ properties:
>  
>    vcc-supply: true
>  
> +  maxim,rfs-ohms:
> +    description: |
> +      Array of resistance values in Ohms for the external Rfs resistors
> +      connected to the FS pins.
> +      - For DS44x2 (2 channels): 2 values required.
> +      - For DS44x4 (4 channels): 4 values required.
> +      Typical values range from 40000 (40 kOhm) to 160000 (160 kOhm).
> +    minItems: 2
> +    maxItems: 4
> +    $ref: /schemas/types.yaml#/definitions/uint32-array

Drop. You should see a warning, so I claim this wasn't tested/checked.

Best regards,
Krzysztof