Re: [PATCH RFT 3/3] arm64: dts: qcom: glymur-crd: Enable USB support

[Krzysztof Kozlowski]

On 20/01/2026 13:07, Pankaj Patil wrote:
> On 1/13/2026 6:03 PM, Abel Vesa wrote:
>> From: Wesley Cheng <wesley.cheng@xxxxxxxxxxxxxxxx>
>>
>> The Qualcomm Glymur Compute Reference Device comes with 3 Type-C ports,
>> one USB Type-A, and a fingerprint reader connected over USB. Each of these
>> 3 Type-C ports are connected to one of the USB combo PHYs and one of the
>> M31 eUSB2 PHYs. The Type-A is connected to the USB Multi-port controller
>> via one of the M31 eUSB2 PHYs and one combo PHY. The fingerprint reader
>> is connected to the USB_2 controller. All M31 eUSB2 PHYs have associated
>> eUSB2 to USB 2.0 repeaters, which are either part of SMB2360 PMICs or
>> dedicated NXP PTN3222.
>>
>> So enable all needed controllers, PHYs and repeaters, while describing
>> their supplies. Also describe the PMIC glink graph for Type-C connectors.
>>
>> Signed-off-by: Wesley Cheng <wesley.cheng@xxxxxxxxxxxxxxxx>
>> Co-developed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
>> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
>> ---


Please kindly trim the replies from unnecessary context. It makes it
much easier to find new content.

I went through entire pages of quoted text and found no relevant
answer... probably because it was deep hidden in these pages of
irrelevant quote.

Best regards,
Krzysztof